Publications
-
Source
[Abstract, Contribution to a conference proceedings]
Mycelium-basec composites with minimal CO2footprint for the building industry
In: Science Day 22 : built and lived environment - towards a sustainable, livable, urban, and regional future : Pop-Up Campus in Aachen on 30 June 2022 : urban health solutions, carbon sink solutions & materials, built-as-resource solutions, climate change adaptation, agile infrastructure solutions : book of abstracts, 2022 Author(s)
Trautz, Martin
Saez, Dana Laura
Grizmann, Denis
Werner, Anett -
Source
[Dissertation / PhD Thesis]
Formfindung und Potential beanspruchungsadaptiver Faltungen, 2022
[DOI: 10.18154/RWTH-2023-01104] Author(s)
Musto, Juan -
Source
[Contribution to a book, Contribution to a conference proceedings]
Scan2FEM: From Point Clouds to Structured 3D Models Suitable for Simulation
In: [EUROGRAPHICS Workshop on Graphics and Cultural Heritage (2022) / R. Pintus and F. Ponchio (Editors)], [1]-10, 2022
[DOI: 10.2312/GCH.20221215] Author(s)
Selman, Zain (Corresponding author)
Musto, Juan
Kobbelt, Leif -
Source
[Journal Article]
Karosseriebautechnik für die Architektur
In: Detail / Deutsche Ausgabe, 7/8, 22-25, 2022 Author(s)
Trautz, Martin
Pofahl, Thorsten Christian
Seiter, Alex Josef -
Source
[Journal Article]
Neue Baumaterialien für die Bioökoomie : Das Potenzial von Pilzen
In: RWTH-Themen, 1, 34-39, 2022
[DOI: 10.18154/RWTH-2022-09573] Author(s)
Saez, Dana Laura
Grizmann, Denis
Trautz, Martin
Werner, Anett -
Source
[Contribution to a conference proceedings, Journal Article]
Mycelium-based construction materials for the post-oil era
In: Chemie - Ingenieur - Technik : CIT, 94 (9), V4.16, 2022
[DOI: 10.1002/cite.202255061] Author(s)
Saez, Dana Laura (Corresponding author)
Grizmann, Denis
Trautz, Martin
Werner, Anett -
Source
[Contribution to a book, Contribution to a conference proceedings]
Vorbohren für Vollgewindeschrauben mittels Laserstrahlung
In: 1. Fachkongress Konstruktiver Ingenieurbau : Kompetenz-Plattform für die bautechnische Gesamtplanung / Irmgard Lochner-Aldinger, Technische Akademie Esslingen e. V., 275-280, 2022 Author(s)
Grizmann, Denis
Pranjic, Andrija
Trautz, Martin -
Source
[Journal Article]
Myzelkomposit als vielseitig einsetzbarer, kreislaufgerechter Werkstoff für das Bauen
In: nbau : nachhaltig bauen, 1 (2), 37-45, 2022 Author(s)
Trautz, Martin
Saez, Dana Laura
Grizmann, Denis
Werner, Anett -
Source
[Contribution to a book, Journal Article]
Exploring the Binding Capacity of Mycelium and Wood-Based Composites for Use in Construction
In: Biomimetics : open access journal, 7 (2), 78, 2022
[DOI: 10.3390/biomimetics7020078] Author(s)
Saez, Dana Laura (Corresponding author)
Grizmann, Denis
Trautz, Martin
Werner, Anett -
Source
[Contribution to a book, Contribution to a conference proceedings]
Building materials from wood and fungal mycelium for load-bearing structures
In: 1. Fachkongress Konstruktiver Ingenieurbau : Kompetenz-Plattform für die bautechnische Gesamtplanung, 259-264, 2022 Author(s)
Saez, Dana Laura
Grizmann, Denis
Trautz, Martin
Werner, Anett -
Source
[Journal Article]
Leichtbaukonstruktionen aus Feinblech
In: Stahlbau, 91 (6), 375-384, 2022
[DOI: 10.1002/stab.202200015] Author(s)
Trautz, Martin
Pofahl, Thorsten Christian
Seiter, Alex Josef (Corresponding author)
Hirt, Gerhard
Reitmaier, Lisa-Marie
Bailly, David -
Source
[Journal Article]
Laser predrilling for high-precision positioning and installation of fully threaded screws in glued-laminated timber (glulam)
In: Wood material science and engineering, 2022
[DOI: 10.1080/17480272.2022.2051735] Author(s)
Trautz, Martin (Corresponding author)
Grizmann, Denis
Pranjic, Andrija
Raupach, Michael
Glawe, Clarissa
Gillner, Arnold
Bornschlegel, Benedikt
Haasler, Dennis -
Source
[Contribution to a book, Contribution to a conference proceedings]
Integration of Algorithm-based Optimization into the Design Process of Industrial Buildings: A Case Study
In: Proceedings of the 2021 DigitalFUTURES : The 3rd International Conference on Computational Design and Robotic Fabrication (CDRF 2021) / Philip F. Yuan, Hua Chai, Chao Yan, Neil Leach, editors, 179-188, 2021
[DOI: 10.1007/978-981-16-5983-6_17] Author(s)
Konrad, Mirjam (Corresponding author)
Saez, Dana Laura (Corresponding author)
Trautz, Martin -
Source
[Contribution to a conference proceedings]
DI-Terial - Development of Sensory-Informed Design-to-Fabrication Processes for the Efficient Use and Robotic Production of Discarded One-Off Hardwood Elements
In: [World Conference on Timber Engineering, WCTE, 2021-08-09 - 2021-08-12], 8 Seiten, 2021 Author(s)
Amtsberg, Felix (Corresponding author)
Moreno Gata, Kevin (Corresponding author)
Huang, Yijiang (Corresponding author)
Marshall, Daniel (Corresponding author)
Mueller, Caitlin (Corresponding author) -
Source
[Journal Article]
Nachruf für Univ.-Prof. Dr.-Ing. em. Franz Krauss (1928-2021)
In: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 98 (6), 457-457, 2021 Author(s)
Trautz, Martin -
Source
[Journal Article, Review]
Statik und Tragwerklehre für Architekten
In: Der @Bausachverständige, 17 (6), 78-79, 2021 Author(s)
Trautz, Martin -
Source
[Dissertation / PhD Thesis]
Demonstrationsfabriken : Eine gebäudetypologische Untersuchung, 2021
[DOI: 10.18154/RWTH-2021-11785] Author(s)
Moser, Franziska Julia -
Source
[Contribution to a conference proceedings]
Long-term behaviour and residual load-bearing capacity of the self-tapping screws
In: [World Conference on Timber Engineering, WCTE, 2021-08-09 - 2021-08-12, online], 2021 Author(s)
Pranjic, Andrija (Corresponding author)
Grizmann, Denis
Trautz, Martin
Arboleda, Carlos -
Source
[Contribution to a conference proceedings]
Laser-drilled Guideholes for self-tapping-screws - Recent developments
In: [World Conference on Timber Engineering, WCTE, 2021-08-09 - 2021-08-12, online], 7 Seiten, 2021 Author(s)
Grizmann, Denis (Corresponding author)
Pranjic, Andrija (Corresponding author)
Haasler, Dennis (Corresponding author)
Bornschlegel, Benedikt (Corresponding author)
Glawe, Clarissa (Corresponding author)
Trautz, Martin (Corresponding author) -
Source
[Contribution to a conference proceedings]
Developing Sandwich Panels with a Mid-layer of Fungal Mycelium Composite for a Timber Panel Construction System
In: [World Conference on Timber Engineering, WCTE, 2021-08-09 - 2021-08-12, online], 7 Seiten, 2021 Author(s)
Saez, Dana Laura
Grizmann, Denis
Trautz, Martin
Werner, Anett -
Source
[Contribution to a book, Contribution to a conference proceedings]
Repair it with additive manufacturing: an approach to the circular economy in architectural education
In: Inspiring the next generation : conference proceedings : the 7th International Conference on Spatial Structures and the Annual Symposium of the IASS / edited by: Alireza Behnejad, Gerard Parke and Omidali Samavati, 278-284, 2021 Author(s)
Saez, Dana Laura (Corresponding author)
Moreno Gata, Kevin
Trautz, Martin -
Source
[Contribution to a book, Contribution to a conference proceedings]
Analyzing a fungal mycelium and chipped wood composite for use in construction
In: Inspiring the next generation : conference proceedings : the 7th International Conference on Spatial Structures and the Annual Symposium of the IASS / edited by: Alireza Behnejad, Gerard Parke and Omidali Samavati, 555-565, 2021 Author(s)
Saez, Dana Laura (Corresponding author)
Grizmann, Denis
Trautz, Martin
Werner, Anett -
Source
[Contribution to a conference proceedings]
Study and Simulation of Self-formation for Local Tree Growth
In: [World Conference on Timber Engineering, WCTE, 2021-08-09 - 2021-08-12, online], 7 Seiten, 2021 Author(s)
Moreno Gata, Kevin (Corresponding author)
Musto, Juan (Corresponding author)
Pranjic, Andrija (Corresponding author)
Trautz, Martin (Corresponding author) -
Source
[Contribution to a conference proceedings]
Guiding the Tree Growth for Timber Structures Design
In: [World Conference on Timber Engineering, WCTE, 2021-08-09 - 2021-08-12, online], 6 Seiten, 2021 Author(s)
Moreno Gata, Kevin (Corresponding author)
Grizmann, Denis (Corresponding author)
Trautz, Martin (Corresponding author) -
Source
[Contribution to a conference proceedings]
DI-Terial - Development of Sensory-Informed Design-to-Fabrication Processes for the Efficient Use and Robotic Production of Discarded One-Off Hardwood Elements
In: [World Conference on Timber Engineering, WCTE, 2021-08-09 - 2021-08-12, online], 8 Seiten, 2021 Author(s)
Amtsberg, Felix (Corresponding author)
Moreno Gata, Kevin (Corresponding author)
Huang, Yijiang (Corresponding author)
Marshall, Daniel (Corresponding author)
Mueller, Caitlin (Corresponding author) -
Source
[Contribution to a book, Contribution to a conference proceedings]
Structural Up-cycling : Matching Digital and Natural Geometry
In: Advances in Architectural Geometry 2020 / Olivier Bavarel, Cyril Douthe, Romain Mesnil, Caitlin Mueller, Helmut Pottmann, Tomohiro Tachi Editors, 486-505, 2021 Author(s)
Amtsberg, Felix
Huang, Yijiang
Marshall, Daniel
Moreno Gata, Kevin
Mueller, Caitlin -
Source
[Contribution to a book, Contribution to a conference proceedings]
Sheet Metal Shells
In: 14. Baustatik Baupraxis. -23. und 24. März 2020, Universität Stuttgart / Herausgeber: Manfred Bischoff, Malte von Scheven, 439-446, 2020 Author(s)
Seiter, Alex Josef
Pofahl, Thorsten Christian
Trautz, Martin
Reitmaier, Lisa-Marie
Bailly, David
Hirt, Gerhard -
Source
[Report]
Bond behaviour of fully threaded screws with long bonding lengths used as reinforcement in glue laminated timber - long-term behaviour, 2020 Author(s)
Pranjic, Andrija
Trautz, Martin -
Source
[Contribution to a conference proceedings]
Extended three-phase bond behavior model between glulam wood matrix and axially loaded inclined self-tapping screws
In: Doktorandenkolloquium Holzbau Forschung + Praxis Stuttgart, 05. + 06. März 2020 / Herausgeber: Prof. Dr.-Ing. Ulrike Kuhlmann [und 3 weitere], 135-142, 2020 Author(s)
Pranjic, Andrija -
Source
[Contribution to a book, Contribution to a conference proceedings]
Growing Construction Components : Design and simulation strategy for self-formation following tree growth
In: Anthropologic - architecture and fabrication in the cognitive age : eCAADe 2020 : proceedings, the 38th Conference on Education and Research in Computer Aided Architectural Design in Europe : online conference, 16th-17th September 2020, Berlin, Germany, Institute of Architecture, Technische Universität Berlin / edited by Liss C. Werner, Dietmar Koering. - Volume 2, 51-59, 2020 Author(s)
Moreno Gata, Kevin (Corresponding author)
Musto, Juan
Trautz, Martin (Corresponding author) -
Source
[Journal Article]
Deep Drilling of Structural Timber with High Power Ultrashort Pulsed Laser Radiation
In: Journal of Laser Micro/Nanoengineering, 15 (3), 195-203, 2020
[DOI: 10.2961/jlmn.2020.03.2007] Author(s)
Bornschlegel, Benedikt (Corresponding author)
Haasler, Dennis
Finger, Johannes
Grizmann, Denis
Trautz, Martin
Gillner, Arnold -
Source
[Contribution to a conference proceedings]
Wenn man mit Schrauben bewehren will
In: Tagungsband 4. Aachener Holzbautagung 2019, 12. und 13. September an der FH Aachen / Herausgeber: Prof. Dr.-Ing. Thomas Uibel, Prof. Dr.-Ing. Leif Arne Peterson ; gefördert vom AFH, Aachener Freundeskreis der Holzingenieure e.V., 20-33, 2019 Author(s)
Trautz, Martin -
Source
[Contribution to a book, Contribution to a conference proceedings]
Form finding of stress adapted folding as a lightweight structure under different load cases
In: Form and Force : IASS Symposium 2019 - 60th Anniversary Symposium of the International Association for Shell and Spatial Structures/Structural Membranes 2019 - 9th International Conference on Textile Composites and Inflatable Structures : Barcelona, Spain, October 7-10, 2019 / Carlos Lázaro, Kai-Uwe Bletzinger and Eugenio Oñate (eds.) ; the conference organizers acknowledge the support of the following organizations: International Association for Shell and Spatial Structures (IASS), European Community on Computational Methods in Applied Sciences (ECCOMAS), International Association for Computational Mechanics (IACM), Asociación Española de Ingeniería Estructural, Universitat Politècnica de Catalunya (UPC), International Centre for Numerical Methods in Engineering (CIMNE) - Spain, E.T.S. Ingeniería de Caminos, C.y.P. (UPV), 2535-2542, 2019 Author(s)
Musto, Juan (Corresponding author)
Lyon, Max
Trautz, Martin
Kobbelt, Leif -
Source
[Contribution to a book, Contribution to a conference proceedings]
Architectural ceramics influenced by structured materials
In: Form and Force : IASS Symposium 2019 - 60th Anniversary Symposium of the International Association for Shell and Spatial Structures/Structural Membranes 2019 - 9th International Conference on Textile Composites and Inflatable Structures : Barcelona, Spain, October 7-10, 2019 / Carlos Lázaro, Kai-Uwe Bletzinger and Eugenio Oñate (eds.) ; the conference organizers acknowledge the support of the following organizations: International Association for Shell and Spatial Structures (IASS), European Community on Computational Methods in Applied Sciences (ECCOMAS), International Association for Computational Mechanics (IACM), Asociación Española de Ingeniería Estructural, Universitat Politècnica de Catalunya (UPC), International Centre for Numerical Methods in Engineering (CIMNE) - Spain, E.T.S. Ingeniería de Caminos, C.y.P. (UPV), 1696-1703, 2019 Author(s)
Saez, Dana Laura (Corresponding author)
Musto, Juan
Trautz, Martin -
Source
[Contribution to a book, Contribution to a conference proceedings]
Design and Analysis of Freeform Shell Structures Composed of Doubly Curved Sheet Metal Panels
In: Form and Force : IASS Symposium 2019 - 60th Anniversary Symposium of the International Association for Shell and Spatial Structures/Structural Membranes 2019 - 9th International Conference on Textile Composites and Inflatable Structures : Barcelona, Spain, October 7-10, 2019 / Carlos Lázaro, Kai-Uwe Bletzinger and Eugenio Oñate (eds.) ; the conference organizers acknowledge the support of the following organizations: International Association for Shell and Spatial Structures (IASS), European Community on Computational Methods in Applied Sciences (ECCOMAS), International Association for Computational Mechanics (IACM), Asociación Española de Ingeniería Estructural, Universitat Politècnica de Catalunya (UPC), International Centre for Numerical Methods in Engineering (CIMNE) - Spain, E.T.S. Ingeniería de Caminos, C.y.P. (UPV), 60-67, 2019 Author(s)
Seiter, Alex Josef (Corresponding author)
Pofahl, Thorsten Christian
Trautz, Martin
Reitmaier, Lisa-Marie
Hirt, Gerhard -
Source
[Dissertation / PhD Thesis]
Folded plate structures : Geometry, mechanics, design, 2019
[DOI: 10.18154/RWTH-2020-00373] Author(s)
Della Puppa, Giovanni -
Source
[Journal Article]
A Unified Representation of Folded Surfaces via Fourier Series
In: Nexus network journal : NNJ, 21 (3), 491-526, 2019
[DOI: 10.1007/s00004-019-00456-1] Author(s)
Della Puppa, Giovanni (Corresponding author)
Sauer, Roger Andrew
Trautz, Martin -
Source
[Journal Article]
Beanspruchungsoptimierte Faltungen aus Stahl für selbsttragende Raumfaltwerke
In: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 96 (12), 902-911, 2019
[DOI: 10.1002/bate.201900024] Author(s)
Musto, Juan (Corresponding author)
Lyon, Max
Trautz, Martin
Kobbelt, Leif -
Source
[Contribution to a book, Contribution to a conference proceedings]
Prozesskette aus Streckziehen und Inkrementeller Blechumformung für die Fertigung mehrsinnig gekrümmter Feinblechpaneele
In: Ideen Form geben : 33. ASK Umformtechnik, 28.-29. März 2019, Eurogress Aachen :Tagungsband / [Gerhard Hirt] ; Institut für Bildsame Formgebung - Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 147-156, 2019 Author(s)
Reitmaier, Lisa-Marie (Corresponding author)
Bailly, David
Hirt, Gerhard
Pofahl, Thorsten Christian
Seiter, Alex Josef
Trautz, Martin -
Source
[Poster]
Development of a Thick Plate Folding Mechanism as a Cover for a 3D printer
In: 7. International Meeting on Origami in Science, Mathematics and Education Oxford 2018-09-05 - 2018-09-07, 2018
[DOI: 10.13140/RG.2.2.23088.40966] Author(s)
Siebrecht, Justus (Corresponding author)
Jacobs, Georg
Dehn, Simon Michael
Spütz, Kathrin
Weigel, Chantal Denise (Corresponding author)
Hoffmann, Susanne
Buffart, Henri
Trautz, Martin
Paris, Jascha Norman
Corves, Burkhard -
Source
[Preprint]
Karolingische Tonnengewölbe im Aachener Dom : Baugeschichte, Konstruktion und Technik, 2018
[DOI: 10.18154/RWTH-2019-01489] Author(s)
Raabe, Christian
Trautz, Martin
Di Pumpo, Carlaluisa -
Source
[Contribution to a book, Contribution to a conference proceedings]
Comparison and Derivable Benefits of Technical Folding
In: Digitalisierung und Produktentwicklung - vernetzte Entwicklungsumgebungen : 16. Gemeinsames Kolloquium Konstruktionstechnik : am 11. und 12. Oktober 2018 in Bayreuth : Tagungsband / Hrsg.: Klaus Brökel, Burkhard Corves, Karl-Heinrich Grote, Armin Lohrengel, Norbert Müller, Arun Nagarajah, Frank Rieg, Gerhard Scharr, Ralph Stelzer, 361-372, 2018 Author(s)
Weigel, Chantal Denise
Jacobs, Georg
Katzwinkel, Tim
Merz, Judith
Paris, Jascha Norman
Corves, Burkhard
Buffart, Henri
Hoffmann, Susanne
Trautz, Martin -
Source
[Contribution to a book, Contribution to a conference proceedings]
Technische Faltung : ein praktischer Entwicklungsansatz
In: Digitalisierung und Produktentwicklung - vernetzte Entwicklungsumgebungen : 16. Gemeinsames Kolloquium Konstruktionstechnik : am 11. und 12. Oktober 2018 in Bayreuth : Tagungsband / Hrsg.: Klaus Brökel, Burkhard Corves, Karl-Heinrich Grote, Armin Lohrengel, Norbert Müller, Arun Nagarajah, Frank Rieg, Gerhard Scharr, Ralph Stelzer, 349-360, 2018 Author(s)
Weigel, Chantal Denise
Jacobs, Georg
Katzwinkel, Tim
Siebrecht, Justus
Merz, Judith
Paris, Jascha Norman
Corves, Burkhard
Buffart, Henri
Hoffmann, Susanne
Trautz, Martin -
Source
[Journal Article]
Robofakturen : Fabriktypen für die Industrie 4.0
In: wt Werkstattstechnik online, 108 (9), 586-591, 2018 Author(s)
Trautz, Martin (Corresponding author)
Moser, Franziska Julia -
Source
[Contribution to a book, Contribution to a conference proceedings]
On Using Tessellation Properties for the Development of Classifying Criteria for Foldable Mechanisms
In: Origami 7 : the proceedings from the 7th International Meeting on Origami Science, Mathematics, and Education / Editorial board Robert J. Lang [und 16 Weitere]. - Volume 4: Engineering Two, 1103-1118, 2018 Author(s)
Siebrecht, Justus
Jacobs, Georg
Weigel, Chantal Denise
Dehn, Simon Michael
Buffart, Henri
Hoffmann, Susanne
Paris, Jascha Norman
Trautz, Martin
Corves, Burkhard -
Source
[Contribution to a book, Contribution to a conference proceedings]
Kinematic and Kinetostatic Classification for Motion-Task-Oriented Synthesis of Folding Mechanisms
In: Origami 7 : the proceedings from the 7th International Meeting on Origami Science, Mathematics, and Education / Editorial board Robert J. Lang [und 16 Weitere]. - Volume 4: Engineering Two, 1069-1086, 2018 Author(s)
Paris, Jascha Norman
Merz, Judith
Buffart, Henri
Hoffmann, Susanne
Siebrecht, Justus
Weigel, Chantal Denise
Hüsing, Mathias
Trautz, Martin
Corves, Burkhard -
Source
[Contribution to a book, Contribution to a conference proceedings]
Educational Concepts for Developing and Designing Origami-Based Structures
In: Origami 7 : the proceedings from the 7th International Meeting on Origami Science, Mathematics, and Education / Editorial board Robert J. Lang [und 16 Weitere]. - Volume 1: Design, Education, History, and Science, 241-256, 2018 Author(s)
Hoffmann, Susanne
Buffart, Henri
Paris, Jascha Norman
Merz, Judith
Siebrecht, Justus
Weigel, Chantal Denise
Corves, Burkhard
Trautz, Martin -
Source
[Contribution to a book, Contribution to a conference proceedings]
Folding Mechanisms with Discriminate Extremal Configurations for Structural Purposes
In: Origami 7 : the proceedings from the 7th International Meeting on Origami Science, Mathematics, and Education / Editorial board Robert J. Lang [und 16 Weitere]. - Volume 3: Engineering One, 685-698, 2018 Author(s)
Buffart, Henri
Hoffmann, Susanne
Paris, Jascha Norman
Weigel, Chantal Denise
Siebrecht, Justus
Corves, Burkhard
Trautz, Martin -
Source
[Contribution to a conference proceedings]
Bond behavior of axially loaded inclined self-tapping screws in glulam
In: [7. Doktorandenkolloquium "Holzbau Forschung und Praxis", 2018-03-08 - 2018-03-09, Stuttgart, Germany], 175-182, 2018 Author(s)
Pranjic, Andrija (Corresponding author) -
Source
[Contribution to a conference proceedings]
Structural tree growth optimization
In: [World Conference on Timber Engineering 2018, WCTE, 2018-08-20 - 2018-08-24, Seoul, Korea], 2018 Author(s)
Pranjic, Andrija (Corresponding author)
Trautz, Martin
Della Puppa, Giovanni -
Source
[Contribution to a conference proceedings]
Residual load-bearing capacity of self-tapping screws after long-term load
In: Proceedings of the IASS Symposium 2018 Creativity in Structural Design : July 16-20, 2018, Boston, USA / Caitlin Mueller, Sigrid Adraenssens (eds.), 160, 2018 Author(s)
Koj, Christoph (Corresponding author)
Trautz, Martin
Grizmann, Denis
Pranjic, Andrija -
Source
[Journal Article]
Der verschwundene Ingenieur
In: Stahlbau, 87 (7), 706-717, 2018
[DOI: 10.1002/stab.201810600] Author(s)
Trautz, Martin (Corresponding author) -
Source
[Dissertation / PhD Thesis]
Wandelbare Faltkonstruktionen aus ebenen, quasi-starren Flächenelementen von nicht vernachlässigbarer Dicke, 2017
[DOI: 10.18154/RWTH-2018-222889] Author(s)
Künstler, Arne -
Source
[Book]
Körperwissen : Vom Inneren zum Äußeren
In: Big Akademie, 2017
[DOI: 10.18154/RWTH-2018-227917] Author(s)
Schmitz, Thomas Heinrich
Dlugaiczyk, Martina (Corresponding author)
Prescher, Andreas
Gerhardt, Rolf (Corresponding author)
Neuefeind, Anja (Contributor)
Binding, Stephanie (Contributor) -
Source
[Journal Article]
Life cycle assessment and sustainable engineering in the context of near net shape grown components : striving towards a sustainable way of future production
In: Environmental sciences Europe : ESEU, 29 (1), 27, 2017
[DOI: 10.1186/s12302-017-0125-x] Author(s)
Kämpfer, Christoph Leo (Corresponding author)
Seiler, Thomas-Benjamin (Corresponding author)
Beger, Anna-Lena
Jacobs, Georg
Löwer, Manuel
Moser, Franziska Julia
Reimer, Julia Jessica
Trautz, Martin
Usadel, Björn
Wormit, Alexandra
Hollert, Henner -
Source
[Journal Article]
Das Dehnungs- und Tragverhalten von Brettschichtholz beim Lasteintrag durch Vollgewindeschrauben
In: Bautechnik, 94 (11), 776-789, 2017
[DOI: 10.1002/bate.201700068] Author(s)
Trautz, Martin (Corresponding author) -
Source
[Report]
Fügung und Verstärkung von Brettschichtholzbauteilen mit ab initio eingeklebten Stahlblechlamellen
In: Forschungsinitiative ZukunftBau F 3037, 2017 Author(s)
Trautz, Martin
Koj, Christoph
Pranjic, Andrija -
Source
[Contribution to a conference proceedings]
Structural tree growth optimization
In: [IASS Annual Symposium 2017 'Interfaces: Architecture, Engineering, Science', IASS 2017, 2017-09-25 - 2017-09-28, Hamburg, Germany], 2017 Author(s)
Pranjic, Andrija (Corresponding author)
Della Puppa, Giovanni
Trautz, Martin -
Source
[Contribution to a conference proceedings]
A generalized description of fold geometry
In: Proceedings of the IASS Annual Symposium 2017 "Interfaces: Architecture, Engineering, Science" : September 25 - 28th, Hamburg, Germany / Annette Bögle, Manfred Grohmann (eds.), 2017 Author(s)
Della Puppa, Giovanni (Corresponding author)
Trautz, Martin -
Source
[Contribution to a conference proceedings]
Stress oriented foldings as an optimized lightweight system
In: Proceedings of the IASS Annual Symposium 2017 "Interfaces: Architecture, Engineering, Science" : September 25 - 28th, Hamburg, Germany / Annette Bögle, Manfred Grohmann (eds.), [1]-8, 2017 Author(s)
Musto, Juan (Corresponding author)
Trautz, Martin -
Source
[Contribution to a conference proceedings]
Non-flat folding mechanisms for structural purposes
In: Proceedings of the IASS Annual Symposium 2017 "Interfaces: Architecture, Engineering, Science" : September 25 - 28th, Hamburg, Germany / Annette Bögle, Manfred Grohmann (eds.), [1]-8, 2017 Author(s)
Buffart, Henri (Corresponding author)
Hoffmann, Susanne
Paris, Jascha Norman
Siebrecht, Justus
Corves, Burkhard
Trautz, Martin -
Source
[Contribution to a book, Contribution to a conference proceedings]
Klassifikation und zielgerichtete Entwicklung von wandelbaren Faltkonstruktionen
In: Tagungsband 12. Kolloquium Getriebetechnik : Technische Universität Dresden, 20.-22. September 2017 / herausgegeben von Michael Beitelschmidt, 205-216, 2017 Author(s)
Paris, Jascha Norman (Corresponding author)
Gottschalk, Marcel
Buffart, Henri
Hoffmann, Susanne
Siebrecht, Justus
Hüsing, Mathias
Jacobs, Georg
Trautz, Martin
Corves, Burkhard -
Source
[Abstract, Contribution to a conference proceedings]
IDFP - interdisciplinary factory planning: the RWTH Aachen University model
In: [International Association for Shell & Spatial Structures 2017: INTERFACES. architecture. engineering.science, IASS 2017, 2017-09-25 - 2017-09-28, Hamburg, Germany], 263, 2017 Author(s)
Hoffmann, Susanne (Corresponding author)
Moser, Franziska Julia
Osterhage, Tanja
Marks, Alexander Frederik
Ansorge, Katrin
Wolisz, Henryk Stefan
Huppertz, René
Trautz, Martin
Burggräf, Peter
Müller, Dirk
Osebold, Rainard
Dannapfel, Matthias -
Source
[Contribution to a conference proceedings]
Industrial building design studios - an effective tool for the structural education of architects
In: [The Annual Symposium of the International Association for Shell and Spatial Structures, IASS 2017, 2017-09-25 - 2017-09-28, Hamburg, Germany], 2017 Author(s)
Moser, Franziska Julia (Corresponding author)
Musto, Juan
Trautz, Martin -
Source
[Conference Presentation]
Mensch-Roboter Interaktion - Räumliche Anforderungen an Fabrikgebäude der Industrie 4.0
In: 23. Industriebauseminar Wien 2017-09-11 - 2017-09-12, 2017
[DOI: 10.18154/RWTH-2017-08965] Author(s)
Moser, Franziska Julia (Corresponding author) -
Source
[Contribution to a conference proceedings]
Fungal mycelium as a building material
In: [The annual symposium of the International Association for Shell and Spatial Structures, IASS 2017, 2017-09-25 - 2017-09-28, Hamburg, Germany], 2017 Author(s)
Moser, Franziska Julia (Corresponding author)
Trautz, Martin
Beger, Anna-Lena
Löwer, Manuel
Jacobs, Georg
Hillringhaus, Felicitas
Wormit, Alexandra
Usadel, Björn
Reimer, Julia Jessica -
Source
[Contribution to a book, Contribution to a conference proceedings]
The potential of naturally grown bent bamboo structures : quantifying the effect of thermal bending on their tensile strength
In: M2D2017 Progress in Mechanics and Materials in Design / Eds.: J.F. Silva Gomes, Shaker A. Meguid, 297-298, 2017 Author(s)
Beger, Anna-Lena
Merkord, F.
Löwer, Manuel
Schäfer, Malte
Jacobs, Georg
Moser, Franziska Julia
Trautz, Martin
Reimer, Julia Jessica
Wormit, Alexandra
Usadel, Björn
Kämpfer, Christoph Leo
Seiler, Thomas-Benjamin
Hollert, Henner -
Source
[Report]
Konstruktionsvorschläge für überdachte Mobilstationen unter Verwendung inkrementell umgeformter Blechpaneele : Untersuchung im Rahmen des Projekts Mobility Broker zur Förderung der Elektromobilität, 2017
[DOI: 10.18154/RWTH-2017-00426] Author(s)
Buffart, Henri
Della Puppa, Giovanni
Koj, Christoph
Gerhardt, Rolf
Trautz, Martin (Editor) -
Source
[Journal Article]
Strong Formulation IsoGeometric Analysis for the vibration of thin membranes of general shape
In: International journal of mechanical sciences, 120, 322-340, 2016
[DOI: 10.1016/j.ijmecsci.2016.10.033] Author(s)
Fantuzzi, Nicholas
Della Puppa, Giovanni
Tornabene, Francesco (Corresponding author)
Trautz, Martin -
Source
[Contribution to a conference proceedings]
Engineered timber - innovative approaches for its structural enhancement
In: Proceedings of the IASS Annual Symposium 2016 "Spatial Structures in the 21st Century", 2016 Author(s)
Trautz, Martin -
Source
[Contribution to a conference proceedings]
Reinforcement of glulam with ab intio embedded steel sheets for high-performance joints
In: [IASS Annual Symposium 2016 'Interfaces: Architecture, Engineering, Science', IASS 2016, 2016-09-26 - 2016-09-30, Tokyo, Japan], 2016 Author(s)
Pranjic, Andrija
Koj, Christoph
Trautz, Martin -
Source
[Contribution to a book, Contribution to a conference proceedings]
Reinforcing glued laminated timber with ab initio embedded steelsheets
In: WCTE 2016 : World Conference on Timber Engineerng : August 22-25, 2016, Vienna, Austria : CD-ROM proceedings / Technische Universität Wien/Vienna University of Technology; Institute for Architectural Sciences, Department of Structural Design and Timber Engineering, Vienna University of Technology; Institute for Mechanics of Materials and Structures ; chairs: Wolfgang Winter, Josef Eberhardsteiner, Françoise-Hélène Jourda, 5017-5025, 2016 Author(s)
Pranjic, Andrija
Koj, Christoph
Trautz, Martin -
Source
[Lecture]
Interdisziplinäre Fabrikplannung - WiSe 2015/16, 2016 Author(s)
Trautz, Martin
Moser, Franziska Julia
Cokcan, Baris
Hoffmann, Susanne
Burggräf, Peter
Marks, Alexander Frederik
Osebold, Rainard
Huppertz, René
Müller, Dirk
Osterhage, Tanja
Ansorge, Katrin -
Source
[Talk (non-conference)]
Industriebau und Gebäudeplanung
In: RWTH Zertifikatkurs Fabrikplanung Aachen, 2016 Author(s)
Trautz, Martin
Moser, Franziska Julia -
Source
[Contribution to a book, Contribution to a conference proceedings]
Muss altes Eisen immer nur Schrottwert haben?
In: Bestandsaufnahme : 1. Jahrestagung der Gesellschaft für Bautechnikgeschichte in Aachen 2013, 57-62, 2016 Author(s)
Trautz, Martin -
Source
[Contribution to a book, Contribution to a conference proceedings]
Self-Supporting Free-Form Structures Made of Individual Sheet Metal Panels
In: [11th Conference on Advanced Building Skins, ABS, 10.10.2016-11.10.2016, Bern, Switzerland], 2016 Author(s)
Pofahl, Thorsten Christian (Corresponding author)
Bailly, David
Schmitz, Roman Ulrich Christopher
Trautz, Martin
Hirt, Gerhard -
Source
[Book, Proceedings]
Bestandsaufnahme - 1. Jahrestagung der Gesellschaft für Bautechnikgeschichte in Aachen 2013, 2016 Author(s)
Trautz, Martin (Editor) -
Source
[Contribution to a book, Contribution to a conference proceedings]
Analyse wandelbarer, starrer Faltstrukturen mit Anwendungsbeispielen
In: Die Basis der Vielfalt : Geometrie als Grundlage und Anregung des Denkens / Udo Beyer (Hrsg.), 191-206, 2016
[DOI: 10.1007/978-3-658-14126-4_12] Author(s)
Brakhage, Karl-Heinz
Buffart, Henri -
Source
[Journal Article]
Verbundverhalten von Vollgewindeschrauben in Brettschichtholzbauteilen: Teil 2: Analytische und numerische Untersuchungen sowie die Ableitung eines Verbundmodells zur Berechnung der Verankerungslänge
In: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 93 (11), 817-827, 2016
[DOI: 10.1002/bate.201500086] Author(s)
Ayoubi, Mazen (Corresponding author) -
Source
[Abstract]
Shape Optimization of Grid Structures by Bending Moment Minimization
In: 4. European Conference on Computational Optimization Leuven 2016-09-12 - 2016-09-14, 2016 Author(s)
Della Puppa, Giovanni
Trautz, Martin
Stefano, Lenci -
Source
[Contribution to a conference proceedings]
Shape optimization of gridshells by bending moment minimization
In: Proceedings of the International Association for Shell and Spatial Structures (IASS) Symposium 2016, 2016 Author(s)
Della Puppa, Giovanni
Trautz, Martin
Lenci, Stefano -
Source
[Contribution to a book, Journal Article]
Visionen für die Fabrik der Zukunft
In: RWTH-Themen : Forschungsmagazin, 2016 (1), 66-69, 2016
[DOI: 10.18154/RWTH-2016-06269] Author(s)
Moser, Franziska Julia
Hoffmann, Susanne
Cokcan, Baris
Trautz, Martin
Huppertz, René
Osebold, Rainard
Osterhage, Tanja
Ansorge, Katrin
Müller, Dirk
Marks, Alexander Frederik
Burggräf, Peter -
Source
[Contribution to a book, Contribution to a conference proceedings]
Bio-based structural building components grown into near net shape
In: Structures and architecture : beyond their limits : proceedings of the third International Conference on Structures and Architecture (ICSA2016), Guimarães, Portugal, 27-29 July 2016 / editor: Paulo J.S. Cruz, Lab2PT, School of Architecture, University of Minho, Guimarães, Protugal, 137-144, 2016
[DOI: 10.1201/b20891-16] Author(s)
Moser, Franziska Julia (Corresponding author)
Trautz, Martin
Beger, Anna-Lena
Löwer, Manuel
Feldhusen, Jörg
Prell, Jürgen
Wormit, Alexandra
Usadel, Björn
Kämpfer, Christoph Leo
Seiler, Thomas-Benjamin
Hollert, Henner -
Source
[Book]
Effizienz von Faltleichtbauplatten
In: Forschungsbericht 04/2016, 2016 Author(s)
Della Puppa, Giovanni
Trautz, Martin -
Source
[Contribution to a book, Contribution to a conference proceedings]
Robotic Production of Individualised Wood Joints : Fabricating an info point structure for the WCTE(
In: CAADRIA 2016 : the 21st International Conference on Computer-aided Architectural Design Research in Asia : living systems and micro-utopias: towards continuous designing / edited by Sheng-Fen Chien, Seungyeon Choo, Marc Aurel Schnabel, Walaiporn Nakapan, Mi Jeong Kim, Stanislav Roudavski, 559-568, 2016 Author(s)
Cokcan, Baris (Corresponding author)
Braumann, Johannes (Corresponding author)
Winter, W. (Corresponding author)
Trautz, Martin (Corresponding author) -
Source
[Abstract, Contribution to a conference proceedings]
Wachstum und Konstruktion in der Natur als Vorbild und Prozess für innovative technische Lösungen
In: Proceedings of the 9. Aachen-Dresden International Textile Conference, 64-64, 2015 Author(s)
Trautz, Martin -
Source
[Contribution to a conference proceedings]
Investigation on the Producibility of Freeform Facade Elements of Sheet Metal as Self-Supporting Structures by Means of Incremental Sheet Forming
In: Proceedings / METEC & 2nd ESTAD 2015, European Steel Technology and Application Days : Düsseldorf, Germany, CCD Congress Center Düsseldorf, 15 - 19 June 2015 / host and organizer: Steel Institute VDEh, 2015 Author(s)
Bailly, David (Corresponding author)
Bambach, Markus
Hirt, Gerhard
Pofahl, Thorsten Christian
Della Puppa, Giovanni
Trautz, Martin -
Source
[Contribution to a conference proceedings]
Multi-objective shape optimization of shell structures based on buckling forms
In: [Future Visions, IASS2015, 17.08.2015-20.08.2015, Amsterdam, Netherlands]..., 2015 Author(s)
Della Puppa, Giovanni
Trautz, Martin -
Source
[Contribution to a book, Contribution to a conference proceedings]
Multilayered metal panels for doubly curved freeform shell structures
In: International Conference on Shells, Plates and Beams, University of Bologna, 9-11 September, 2015, Bologna, Italy / edited by Antonio J. M. Ferreira, Erasmo Viola, Francesco Tornabene, 66-67, 2015 Author(s)
Della Puppa, Giovanni (Corresponding author)
Pofahl, Thorsten Christian
Trautz, Martin
Bailly, David
Hirt, Gerhard -
Source
[Contribution to a book, Contribution to a conference proceedings]
Rocking Origami
In: IASS2015 Annual International Symposium on Future Visions : 17-20 Augustus, Amsterdam, the Netherlands / organised by the International Federation of Automotive Engineering Societies (IASS) and the Royal Institute of Engineers in the Netherlands (KIVI), 1-10, 2015 Author(s)
Pofahl, Thorsten Christian
Buffart, Henri
Della Puppa, Giovanni (Corresponding author)
Trautz, Martin -
Source
[Journal Article]
Design and Application Studies for a Cupola Forming Orbital Arrangement of Miura-Ori Basic Units
In: Journal for geometry and graphics, 19 (1), 43-55, 2015 Author(s)
Barej, Martin (Corresponding author)
Hoffmann, Susanne (Corresponding author)
Knief, Christian
Trautz, Martin (Corresponding author)
Corves, Burkhard (Corresponding author) -
Source
[Contribution to a book, Contribution to a conference proceedings]
Demands on an Adapted Design Process for Foldable Structures
In: Origami6 : Proceedings of the sixth International Meeting on Origami Science, Mathematics, and Education / Koryo Miura, Toshikazu Kawasaki, Tomohiro Tachi, Ryuhei Uehara, Robert J. Lang, Patsy Wang-Iverson (Editors). - II. Technology, art, education, 489-499, 2015 Author(s)
Hoffmann, Susanne
Barej, Martin
Günther, Benedikt
Trautz, Martin
Corves, Burkhard
Feldhusen, Jörg -
Source
[Journal Article]
Verbundverhalten von Vollgewindeschrauben in Brettschichtholzbauteilen. - Teil 1: Experimentelle Untersuchungen zum Einsatz der Schrauben mit großen Einbindelängen als Bewehrung
In: Bautechnik, 11 (2015), 790-799, 2015
[DOI: 10.1002/bate.201400098] Author(s)
Ayoubi, Mazen (Corresponding author)
Trautz, Martin -
Source
[Contribution to a book, Contribution to a conference proceedings]
Substituting Conventional Materials and Manufacturing for Sustainable, near net Shape Grown Components
In: Design for life : the 20th International Conference on Engineering Design (ICED 15); 27th - 30th July 2015, Politecnico di Milano, Italy / organised by Politecnico di Milano, Politecnico di Torino and the Design Society. Ed. by Christian Weber; Stephan Husung; Gaetano Cascini; Marco Cantamessa; Dorian Marjanovic; Monica Bordegoni. - Vol. 1, 279-288, 2015 Author(s)
Löwer, Manuel
Beger, Anna-Lena
Feldhusen, Jörg
Wormit, Alexandra
Prell, Jürgen
Usadel, Björn
Seiler, Thomas-Benjamin
Kämpfer, Christoph Leo
Hollert, Henner
Moser, Franziska
Trautz, Martin -
Source
[Contribution to a book, Contribution to a conference proceedings]
Bond Behaviour of Self-Tapping Screws Being Used as Reinforcement in Glue-Laminated Timber Elements
In: Structural Health Assessment of Timber Structures : Proceedings of the International Conference on Structural Health Assessment of Timber Structures, SHATIS '15, 9-11 September 2015 Wroclaw, Poland / ed. Jerzy Jasieńko & Tomasz Nowak. - Vol. 2, 859-871, 2015 Author(s)
Ayoubi, Mazen (Corresponding author)
Trautz, Martin (Corresponding author) -
Source
[Contribution to a conference proceedings]
Tailored natural components : functional geometry and topology optimization of technical grown plants
In: [11th World Congress on Structural and Multidisciplinary Optimisation, WCSMO-11, 07.07.2015-12.07.2015, Sydney, Australia], 2015 Author(s)
Beger, Anna-Lena (Corresponding author)
Löwer, Manuel
Feldhusen, Jörg
Prell, Jürgen (Corresponding author)
Wormit, Alexandra
Usadel, Björn
Kämpfer, Christoph Leo (Corresponding author)
Seiler, Thomas-Benjamin
Hollert, Henner
Moser, Franziska (Corresponding author)
Trautz, Martin -
Source
[Journal Article]
Laserstrahlbohrungen für richtungsgenau positionierte Vollgewindeschrauben : Einbau und Tragverhalten
In: Bautechnik, 92 (6), 403-411, 2015
[DOI: 10.1002/bate.201400075] Author(s)
Trautz, Martin (Corresponding author)
Koj, Christoph (Corresponding author)
Uchtmann, Hermann (Corresponding author) -
Source
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Growing Near Net Shape Components from Renewable Materials
In: Procedia CIRP, 29, 609-614, 2015
[DOI: 10.1016/j.procir.2015.02.206] Author(s)
Löwer, Manuel (Corresponding author)
Beger, Anna-Lena
Raza, Iliyas
Feldhusen, Jörg
Wormit, Alexandra
Prell, Jürgen
Usadel, Björn
Seiler, Thomas-Benjamin
Kämpfer, Christoph Leo
Hollert, Henner
Trautz, Martin -
Source
[Contribution to a conference proceedings, Poster]
Life cycle assessment as a decision support tool guiding the development of bio-based products
In: [25nd Annual Meeting SETAC Europe : 3-7 May 2015, Barcelona], 2015 Author(s)
Kämpfer, Christoph Leo (Corresponding author)
Seiler, Thomas-Benjamin
Beger, Anna-Lena
Feldhusen, Jörg
Löwer, Manuel
Moser, Franziska
Prell, Jürgen
Trautz, Martin
Usadel, Björn
Wormit, Alexandra
Hollert, Henner -
Source
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Flexible Manufacturing of Double-Curved Sheet Metal Panels for the Realization of Self-Supporting Freeform Structures
In: Key engineering materials, 639, 41-48, 2015
[DOI: 10.4028/www.scientific.net/KEM.639.41] Author(s)
Bailly, David (Corresponding author)
Bambach, Markus
Hirt, Gerhard
Pofahl, Thorsten Christian
Della Puppa, Giovanni
Trautz, Martin -
Source
[Dissertation / PhD Thesis]
Zum Verbundverhalten von Vollgewindeschrauben mit großen Einbindelängen beim Einsatz als Bewehrung in Brettschichtholzbauteilen, 2015 Author(s)
Ayoubi, Mazen -
Source
[Contribution to a book]
Die Gebrüder Benickser. Führende Brückenbauanstalt im Südwesten
In: Neue Beiträge zur Pforzheimer Stadtgeschichte ; Band 4, 141-172, 2014 Author(s)
Trautz, Martin
Voormann, Friedmar -
Source
[Contribution to a book, Journal Article]
Gebr. Benckiser - ein vergessenes Pionierunternehmen des Stahlbrückenbaus der Gründerzeit
In: Bauingenieur, 89 (Sondernr.), 161-168, 2014 Author(s)
Trautz, Martin
Voormann, Friedmar -
Source
[Book, Report]
Untersuchungen zur Herstellbarkeit von frei geformten Hüll- und Fassadenelementen als selbsttragende Struktur ohne Unterkonstruktion aus nichtrostendem Stahl mittels inkrementeller Blechumformung (IBU)
In: Forschung für die Praxis 846, 2014 Author(s)
Hirt, Gerhard
Heise, Franz-Josef
Bambach, Markus
Bailly, David
Trautz, Martin
Heyden, Johann-Wilhelm
Herkrath, Ralf
Pofahl, Thorsten Christian
Della Puppa, Giovanni -
Source
[Contribution to a conference proceedings]
A new concept for freeform shell structures composed of doublycurvedmultilayered panels
In: [Proceedings of the IASS-SLTE 2014 Symposium : the IASS-SLTE 2014 Symposium encompassing the annual IASS Symposium and the 6th Latin American Symposium on Tension Structures, 15 to 19 September 2014], 2014 Author(s)
Pofahl, Thorsten Christian
Della Puppa, Giovanni
Trautz, Martin
Bailly, David
Hirt, Gerhard -
Source
[Contribution to a book, Contribution to a conference proceedings]
Features of Foldings
In: FORM - RULE I RULE - FORM 2013 / Günther H. Filz; Rupert Maleczek; Christian Scheiber (eds.). With contrib. from Christoph Gengnagel ... [koge Institut für konstruktion und gestaltung], 119-130, 2014 Author(s)
Trautz, Martin
Pofahl, Thorsten Christian
Della Puppa, Giovanni -
Source
[Abstract, Contribution to a conference proceedings]
Demands on an Adapted Design Process for Foldable Structures
In: The 6th International Meeting on Origami in Science, Mathematics and Education ; Programm and Abstracts held at The University of Tokyo August 10-13, 2014 / Edited by Toshikazu Kawasaki, Ryuhei Uehara, Tomohiro Tachi and Jun Maekawa Published by The 6OSME Program Committee and The 6OSME Organizing Committee, 133-133, 2014 Author(s)
Hoffmann, Susanne
Barej, Martin
Günther, Benedikt
Trautz, Martin
Corves, Burkhard
Feldhusen, Jörg -
Source
[Abstract, Contribution to a conference proceedings]
Comparison of Design Processes in Architecture and Mechanical Engineering
In: The 6th International Meeting on Origami in Science, Mathematics and Education ; Programm and Abstracts held at The University of Tokyo August 10-13, 2014 / Edited by Toshikazu Kawasaki, Ryuhei Uehara, Tomohiro Tachi and Jun Maekawa Published by The 6OSME Program Committee and The 6OSME Organizing Committee, 132, 2014 Author(s)
Hoffmann, Susanne
Günther, Benedikt
Barej, Martin
Trautz, Martin
Feldhusen, Jörg
Corves, Burkhard -
Source
[Contribution to a book, Contribution to a conference proceedings]
Design and Application Studies for a Cupola Forming Orbital Arrangement of Miura-Ori Basic Units
In: Proceedings of the 16th International Conference on Geometry and Graphics, Innsbruck, August 4-8 2014 / Hans-Peter Schröcker, Manfred Husty (eds.)., 266-276, 2014 Author(s)
Barej, Martin (Corresponding author)
Hoffmann, Susanne (Corresponding author)
Knief, Christian
Trautz, Martin (Corresponding author)
Corves, Burkhard (Corresponding author) -
Source
[Contribution to a book, Contribution to a conference proceedings, Journal Article]
Analysis into differences between the buckling in single-point and two-point incremental sheet forming of components for self-supporting sheet metal structures
In: Key engineering materials, 622/623, 367-374, 2014
[DOI: 10.4028/www.scientific.net/KEM.622-623.367] Author(s)
Bailly, David (Corresponding author)
Bambach, Markus
Hirt, Gerhard
Pofahl, Thorsten Christian
Herkrath, Ralf
Trautz, Martin -
Source
[Contribution to a conference proceedings, Journal Article]
Manufacturing of Innovative Self-Supporting Sheet-Metal Structures Representing Freeform Surfaces
In: Procedia CIRP, 18, 51-56, 2014
[DOI: 10.1016/j.procir.2014.06.106] Author(s)
Bailly, David (Corresponding author)
Bambach, Markus
Hirt, Gerhard
Pofahl, Thorsten Christian
Herkrath, Ralf
Heyden, Hans
Trautz, Martin -
Source
[Book, Report]
Verbundtragverhalten von Vollgewindeschrauben : experimentelle Untersuchungen des Verbundtragverhaltens von Vollgewindeschrauben unterschiedlicher Durchmesser und Winkel zur Holzfaserrichtung ; Ergebnisse aus dem aktuellen Forschungsvorhaben zum Verbundverhalten von Vollgewindeschrauben mit großen Einbindelängen beim Einsatz als Bewehrung in Brettschichtholzbauteilen ; Ergebnisbericht zum Forschungsprojekt
In: Schriftenreihe des Lehrstuhls für Tragkonstruktionen der RWTH Aachen : Forschungsbericht 2014,01, 2014 Author(s)
Ayoubi, Mazen
Trautz, Martin -
Source
[Contribution to a book, Journal Article]
Interdisziplinärer Fabrikentwurf : Angehende Architekten bereiten sich auf die Fabrikplanung der Zukunft vor
In: Ernst & Sohn Special, 2014 (Februar), 11-16, 2014 Author(s)
Hoffmann, Susanne
Kamp, Sebastian
Trautz, Martin
Kampker, Achim -
Source
[Journal Article]
Mit Schrauben fügen und bewehren : Langzeitversuche an biegesteifen Rahmenecken im Außenklima
In: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 91 (1), 40-47, 2014
[DOI: 10.1002/bate.201300077] Author(s)
Koj, Christoph (Corresponding author)
Trautz, Martin (Corresponding author) -
Source
[Contribution to a book, Contribution to a conference proceedings]
Mechanism Theory in Architecture Education
In: New Trends in Educational Activity in the Field of Mechanism and Machine Theory : [First International Symposium on the Education in Mechanism and Machine Science (ISEMMS 2013)] / edited by Juan Carlos García-Prada, Cristina Castejón, 277-284, 2013
[DOI: 10.1007/978-3-319-01836-2] Author(s)
Barej, Martin
Hoffmann, Susanne
Della Puppa, Giovanni
Hüsing, Mathias
Corves, Burkhard
Trautz, Martin -
Source
[Website]
Bautechnik oder Bautechnikgeschichte?, 2013 Author(s)
Trautz, Martin -
Source
[Contribution to a book, Contribution to a conference proceedings]
Construction Approach for Deployable Folded Plate Structures without Transversal Joint Displacement
In: New proposals for transformable architecture, engineering and design : in the honor of Emilio Pérez Piñero: proceedings of the first conference transformable 2013 / eds. Félix Escrig and José Sánchez, 331-336, 2013 Author(s)
Buffart, Henri (Corresponding author)
Trautz, Martin (Corresponding author) -
Source
[Contribution to a book, Contribution to a conference proceedings]
Design and manufacturing of self-supporting folded structures using incrementalsheet forming
In: Rethinking Prototyping : Proceedings of the Design Modelling Symposium Berlin 2013 / Christoph Gengnagel (Hrsg.), 491-502, 2013 Author(s)
Trautz, Martin
Heyden, Johann-Wilhelm
Herkrath, Ralf
Pofahl, Thorsten Christian
Bailly, David
Taleb-Araghi, Babak
Hirt, Gerhard -
Source
[Contribution to a book, Contribution to a conference proceedings]
Design and manufacturing of self-supporting folded structures using incremental sheet forming
In: Rethinking prototyping : proceedings of the Design Modelling Symposium Berlin 2013 ; [28/09 - 02/10/2013] / [C. Gengnagel; A. Kilian; J. Nembrini; F. Scheurer (eds.)], 491-502, 2013 Author(s)
Trautz, Martin
Heyden, Johann-Wilhelm
Herkrath, Rolf
Pofahl, Thorsten Christian
Bailly, David
Taleb-Araghi, Babak
Hirt, Gerhard -
Source
[Contribution to a book, Contribution to a conference proceedings]
Interdisciplinary Design of Movable Structures in Architecture Education
In: Transformables 2013 : New proposals for transformable architecture, engineering and design ; Seville 18-20 September 2013, 152, 411-416, 2013 Author(s)
Hoffmann, Susanne
Barej, Martin
Della Puppa, Giovanni
Hüsing, Mathias
Trautz, Martin
Corves, Burkhard -
Source
[Contribution to a book, Contribution to a conference proceedings]
Experimental and Numerical Investigation of Bond between Glue-laminated Timber Elements and Self-Tapping Screws
In: Beyond the limits of man : proceedings of the IASS 2013 Symposium, Wrocław, Poland, 23-27 September 2013 / ed. Jan B. Obrębski and Romuald Tarczewski ; International Association for Shell and Spatial Structures, 167, 2013 Author(s)
Ayoubi, Mazen
Rößler, Günther
Trautz, Martin
Raupach, Michael -
Source
[Contribution to a book, Contribution to a conference proceedings]
Determination of the Stress Distribution in Timber Elements reinforced with Self-Tapping Screws using an Optical Metrology System
In: Structural Health Assessment of Timber Structures : Selected, peer reviewed papers from the 2nd International Conference on Structural Health Assessment of Timber Structures (SHATIS 13), September 4-6, 2013, Trento, Italy / Editors: Maurizio Piazza and Mariapaola Riggio, 432-439, 2013
[DOI: 10.4028/www.scientific.net/AMR.778.432] Author(s)
Ayoubi, Mazen (Corresponding author)
Trautz, Martin (Corresponding author) -
Source
[Contribution to a book, Contribution to a conference proceedings]
Fügen und Verstärken von Holzbauteilen mit Vollgewindeschrauben
In: Aachener Holzbautagung 2013 : 5. und 6. September an der FH Aachen ; Tagungsband / Hrsg. Thomas Uibel; Leif Arne Peterson. Aachener Freundeskreis der Holzingenieure, FH Aachen, 26-33, 2013 Author(s)
Trautz, Martin
Koj, Christoph
Ayoubi, Mazen -
Source
[Contribution to a book, Contribution to a conference proceedings]
Experimentelle Untersuchungen zum Verbundverhalten und zur Kraftübertragung des Verbundwerkstoffes Schraube-Holz
In: Verbundwerkstoffe : 19. Symposium Verbundwerkstoffe und Werkstoffverbunde ; 03.-05. Juli 2013,Stadthalle Karlsruhe / DGM, Dt. Ges. f. Materialkunde, 540-553, 2013 Author(s)
Ayoubi, Mazen
Trautz, Martin -
Source
[Journal Article]
Load-bearing characteristics of plate-like elements with single and multi-layered folded structures of steel sheets
In: Stahlbau, 82 (3), 208-213, 2013
[DOI: 10.1002/stab.201310028] Author(s)
Trautz, Martin (Corresponding author)
Herkrath, Ralf (Corresponding author)
Della Puppa, Giovanni (Corresponding author)
Buffart, Henry -
Source
[Book]
Ausziehverhalten von Vollgewindeschrauben
In: Schriftreihe des Lehrstuhles für Tragkonstruktionen der RWTH Aachen 02/2012, 2013 Author(s)
Ayoubi, Mazen
Trautz, Martin -
Source
[Journal Article]
Systematisierung gefalteter und faltbarer Strukturen in technischen Anwendungen
In: Konstruktion : Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, 65 (1), 69-74, 2013 Author(s)
Barej, Martin
Safi, Yara
Sköck-Hartmann, Britta
Gries, Thomas
Steinseifer, Ulrich
Corves, Burkhard
Trautz, Martin -
Source
[Journal Article]
Mit Vollgewindeschrauben zur biegesteifen Rahmenecke
In: Bauen mit Holz, 2013 (02), 32-37, 2013 Author(s)
Ayoubi, Mazen
Koj, Christoph
Trautz, Martin -
Source
[Contribution to a book, Contribution to a conference proceedings]
Early Iron Bridge Construction for the Grand Duchy of Baden and for Central Europe
In: Nuts & bolts of construction history ; culture, technology and society ; Band 1, 419-428, 2012 Author(s)
Trautz, Martin
Voormann, Friedmar -
Source
[Contribution to a book]
Von der Formplastik zum Raumfaltwerk
In: Werkzeug - Denkzeug : manuelle Intelligenz und Transmedialität kreativer Prozesse / Thomas H. Schmitz; Hannah Groninger (Hg.), 275-282, 2012
[DOI: 10.14361/transcript.9783839421079.275] Author(s)
Trautz, Martin -
Source
[Report]
Prinzipien aus der Faltkunst für technische Aufgabenstellungen nutzbar machen
In: Serie A : Jahresbericht 2012,3 der Fakultät für Architektur, 2012 Author(s)
Hoffmann, Susanne
Trautz, Martin -
Source
[Journal Article]
Herstellung frei geformter, selbst tragender Faltstrukturen aus Stahlblech mit der inkrementellen Blechufmormung (IBU)
In: Stahlbau, 81 (12), 959-967, 2012
[DOI: 10.1002/stab.201201637] Author(s)
Trautz, Martin
Heyden, Willi
Herkrath, Ralf
Pofahl, Thorsten Christian
Hirt, Gerhard
Taleb-Araghi, Babak
Bailly, David -
Source
[Contribution to a book, Journal Article]
Architektur für Infrastruktur und Energieerzeugung : Entwurfsaufgaben für Gebäude mit auratischem Charakter
In: RWTH-Themen, 01, 42-43, 2012
[DOI: 10.18154/RWTH-CONV-013445] Author(s)
Bernhardt, Anne-Julchen
Trautz, Martin
Leufgens, Isabel
Herkrath, Ralf
Hoffmann, Susanne
Koj, Christoph -
Source
[Contribution to a book, Journal Article]
Faltung und Origami - Prinzipien für Konstruktionen in Architektur und Ingenieurwesen
In: RWTH-Themen, 1, 8-13, 2012
[DOI: 10.18154/RWTH-CONV-023647] Author(s)
Hoffmann, Susanne
Trautz, Martin -
Source
[Journal Article]
Bewehren mit Vollgewindeschrauben
In: Bauen mit Holz, 114 (10), 34-39, 2012 Author(s)
Ayoubi, Mazen
Koj, Christoph
Trautz, Martin -
Source
[Journal Article, Review]
Polonyi, Stefan: 'Tragende Linien - Tragende Flächen' [Ausstellung] . - Dortmund, 2012
In: Arch+ : Zeitschrift für Architektur und Städtebau, 45 (206/207), 2-3, 2012 Author(s)
Gerhardt, Rolf (Reviewer) -
Source
[Contribution to a conference proceedings]
Approaches for Modeling of Deployable Folded Plate Structures
In: ICGG 2012 : 15th International Conference on Geometry and Graphics ; 1-5 August 2012, Montreal, Canada / Organized by Dep. of Mechanical Engineering Fac. of Engineering McGill Univ., Montreal, Canada. Under the patronage of International Society for Geometry and Graphics ..., 60, ... S., 2012 Author(s)
Barej, Martin
Hoffmann, Susanne
Buffart, Henri
Hüsing, Mathias
Corves, Burkhard
Trautz, Martin -
Source
[Contribution to a conference proceedings]
Experimentelle und numerische Untersuchungen zum Verbundverhalten von Vollgewindeschrauben in Brettschichtholzbauteilen
In: 1. Wissenschaftstag der Fakultät für Architektur : 22.06.2012 / RWTH Aachen Univ. Architektur, 2012 Author(s)
Ayoubi, Mazen -
Source
[Contribution to a conference proceedings]
Bond Characteristics of Self-Tapping Screws Used as Reinforcement in Timber Structures
In: IASS-APCS 2012 Symposium : From Spatial Structures to Space Structures ; 21-24 May 2012, Prima Hotel Seoul, Korea ; proceedings / organized by Korean Association for Spatial Structures ..., FF-086, 2012 Author(s)
Ayoubi, Mazen
Trautz, Martin -
Source
[Contribution to a book, Journal Article]
Mit Schrauben Bewehren
In: RWTH-Themen, 2012 (1), 44-45, 2012
[DOI: 10.18154/RWTH-CONV-067768] Author(s)
Ayoubi, Mazen
Koj, Christoph
Trautz, Martin -
Source
[Journal Article]
The construction of iron bridges in the southwest of germany from 1844 to 1889-from lattice girders to truss girders (part 3)
In: Stahlbau, 81 (3), 233-242, 2012
[DOI: 10.1002/stab.201201527] Author(s)
Trautz, Martin
Voormann, Friedmar -
Source
[Contribution to a book, Journal Article]
Innovative Fabriken interdisziplinär planen
In: wt Werkstattstechnik online, 102 (4), 186-192, 2012 Author(s)
Kampker, Achim
Osebold, Rainard
Trautz, Martin
Burggräf, Peter
Krunke, Moritz
Meckelnborg, Alexander
Leufgens, Isabel
Rogel, Dirk -
Source
[Journal Article]
Der Bau eiserner Brücken im Südwesten Deutschlands 1844 bis 1889 - Mit Holz zum Eisen (Teil 1)
In: Stahlbau, 81 (1), 57-62, 2011
[DOI: 10.1002/stab.201201509] Author(s)
Trautz, Martin (Corresponding author)
Voormann, Friedmar -
Source
[Journal Article]
Der Bau eiserner Brücken im Südwesten Deutschlands 1844 bis 1889 - Gitterträgerbrücken und Taktschiebeverfahren (Teil 2)
In: Stahlbau, 81 (2), 133-141, 2012
[DOI: 10.1002/stab.201201517] Author(s)
Trautz, Martin
Voormann, Friedmar -
Source
[Contribution to a book, Contribution to a conference proceedings]
Designed for Friedrich Nietzsche: A Roof- and Facade-Structure cut out from Cross-Laminated Timber-Plates
In: Taller, longer, lighter : meeting growing demands with limited resources ; IABSE-IASS 2011 London symposium ; the 35th annual symposium of IABSE ; the 52nd annual Symposium of IASS and incorporating the 6th International Conference on Space Structures ; London, September 20 - 23, 2011, 2011 Author(s)
Trautz, Martin -
Source
[Contribution to a book, Contribution to a conference proceedings]
Tension Bamboo Joints for Spatial Structure
In: Taller, longer, lighter : meeting growing demands with limited resources ; IABSE-IASS 2011 London symposium ; the 35th annual symposium of IABSE ; the 52nd annual Symposium of IASS and incorporating the 6th International Conference on Space Structures ; London, September 20 - 23, 2011, 2011 Author(s)
Widyowijatnoko, Andry
Trautz, Martin -
Source
[Abstract]
Folds and Fold Plate Structures in Architecture and Engineering
In: IASS Working Group 15 Structural Morphology, 2011 Author(s)
Trautz, Martin
Cierniak, Susanne -
Source
[Contribution to a book, Contribution to a conference proceedings]
Hamlet Crèche - a kindergarten in timber and clay constructiob designed and built by German architecture students in South Africa
In: Taller, longer, lighter : meeting growing demands with limited resources ; IABSE-IASS 2011 London symposium ; the 35th annual symposium of IABSE ; the 52nd annual Symposium of IASS and incorporating the 6th International Conference on Space Structures ; London, September 20 - 23, 2011, 421, 2011 Author(s)
Koj, Christoph
Künstler, Arne
Trautz, Martin
Reitz, Judith
Heiermann, Bernadette -
Source
[Contribution to a book]
Modulare Konstruktionen
In: Wie wollen wir in Zukunft bauen? : Festschrift zum 60. Geburtstag von Prof. Dr.-Ing. Wolfram Jäger, Dresden, 19.04.2011 / [hrsg. von: Lehrstuhl Tragwerksplanung, Fakultät Architektur, Technische Universität Dresden. Schriftleitung: Anke Eis ; Sebastian Ortlepp], 333-338, 2011 Author(s)
Trautz, Martin -
Source
[Journal Article]
Das Prinzip des Faltens in Architektur und Ingenieurbau
In: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 88 (2), 76-79, 2011
[DOI: 10.1002/bate.201110006] Author(s)
Trautz, Martin
Ayoubi, Mazen -
Source
[Journal Article]
Starre Faltungen als Leichtbauprinzip im Bauwesen
In: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 88 (2), 80-85, 2011
[DOI: 10.1002/bate.201110007] Author(s)
Herkrath, Ralf
Trautz, Martin -
Source
[Journal Article]
Wandelbare Faltungen aus biegesteifen Faltelementen
In: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 88 (2), 86-93, 2011
[DOI: 10.1002/bate.201110008] Author(s)
Künstler, Arne
Trautz, Martin -
Source
[Contribution to a conference proceedings]
Bond Behaviour by Strengthening of Timber Structures with Self-Tapping Screws
In: XIIth Bilateral German/Czech Symposium : 'Experimental methods and numerical simulation in engineering sciences' ; June 30 - July 3, 2010, LidiceHaus, Bremen, Germany / ed.: R. Harte, 5-8, 2010 Author(s)
Trautz, Martin
Ayoubi, Mazen
Koj, Christoph -
Source
[Contribution to a book, Contribution to a conference proceedings]
Selbsttragende Leichtbausysteme für Freiformarchitekturen
In: Globale Herausforderungen: neue Märkte für die Umformtechnik : 25. ASK Aachener Stahlkolloquium Umformtechnik - Stahl und NE-Werkstoffe ; 11./12. März 2010, Eurogress Aachen ; Tagungsband / IBF Institut für Bildsame Formgebung; IEHK Institut für Eisenhüttenkunde, RWTH Aachen. [Gerhard Hirt (Hrsg.)], 99-107, 2010 Author(s)
Trautz, Martin
Herkrath, Ralf -
Source
[Journal Article]
Für Nietzsche konstruiert - ein Dach- und Fassadentragwerk ausgeschnitten aus Brettsperrholz
In: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 87 (12), 40-47, 2010 Author(s)
Trautz, Martin -
Source
[Journal Article]
Entwerfen, Entwickeln, Bauen : die Ithuba Skills College Hall in Montic, Südafrika
In: Umrisse - Zeitschrift für Baukultur, 9 (6), 40-43, 2009 Author(s)
Künstler, Arne
Reitz, Judith
Heiermann, Bernadette -
Source
[Journal Article]
Mit Schrauben Bewehren - Neue Ergebnisse
In: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 86 (4), 228-238, 2009
[DOI: 10.1002/bate.200910021] Author(s)
Trautz, Martin
Koj, Christoph -
Source
[Journal Article, Review]
Holl, Christian; Siegele, Klaus: 'Metallfassaden. Vom Entwurf bis zur Ausführung'. - München, 2007
In: Stahlbau, 78 (1), 65-66, 2009 Author(s)
Gerhardt, Rolf (Reviewer) -
Source
[Journal Article, Review]
Kurrer, Karl-Eugen: The History of the Theory of Structures. - Berlin, 2008
In: Arch+ : Zeitschrift für Architektur und Städtebau, 193 (9), 07, 2009 Author(s)
Gerhardt, Rolf (Reviewer) -
Source
[Contribution to a book]
Mit Schrauben bewehrtes Holz
In: Zukunft Holz : Statusbericht zum aktuellen Stand der Verwendung von Holz und Holzprodukten im Bauwesen. - Auszug: Kapitel 15 - Konstruktion, Bemessung, 1365-1372, 2009 Author(s)
Trautz, Martin
Koj, Christoph -
Source
[Abstract, Contribution to a book, Contribution to a conference proceedings]
Self-tapping screws as reinforcement for timber structures
In: Evolution and trends in design, analysis and construction of shell and spatial structures : IASS symposium 2009, Valencia; book of abstracts; 28 September - 2 October, 2009, Universidad Politécnica de Valencia, Valencia, Spain / ed.: Alberto Domingo ..., 2009 Author(s)
Trautz, Martin
Koj, Christoph -
Source
[Contribution to a conference proceedings]
Conventional versus substitutive bamboo construction : the classification of bamboo construction
In: 8th World Bamboo Congress Proceedings 16-19 September 2009 / ed. World Bamboo Congress Proceedings. - 10, 17-45, 2009 Author(s)
Trautz, Martin
Widyowijatnoko, Andry -
Source
[Abstract, Contribution to a book, Contribution to a conference proceedings]
The application of folded plate principles on spatial structures with regular, irregular and free-form geometries
In: Evolution and trends in design, analysis and construction of shell and spatial structures : IASS symposium 2009, Valencia; book of abstracts; 28 September - 2 October, 2009, Universidad Politécnica de Valencia, Valencia, Spain / ed.: Alberto Domingo ..., 2009 Author(s)
Trautz, Martin
Herkrath, Ralf -
Source
[Abstract, Contribution to a book, Contribution to a conference proceedings]
Deployable folded plate structures - folding patterns based on 4-fold-mechanism using stiff plates
In: Evolution and trends in design, analysis and construction of shell and spatial structures : IASS symposium 2009, Valencia; book of abstracts; 28 September - 2 October, 2009, Universidad Politécnica de Valencia, Valencia, Spain / ed.: Alberto Domingo ..., 2009 Author(s)
Trautz, Martin
Künstler, Arne -
Source
[Journal Article]
Das Prinzip des Faltens
In: Detail, 49 (12), 1368-1376, 2009 Author(s)
Trautz, Martin -
Source
[Journal Article]
The light - ein pneumatisch gestützter Turm aus Feuerwehrschläuchen
In: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 85 (1), 79-81, 2008
[DOI: 10.1002/bate.200890002] Author(s)
Trautz, Martin
Weber, Felix -
Source
[Journal Article]
Mit Schrauben Bewehren
In: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 85 (3), S. 190-196, 2008
[DOI: 10.1002/bate.200810016] Author(s)
Trautz, Martin
Koj, Christoph -
Source
[Journal Article]
The Stuttgart school of building design
In: Structure magazine, 15 (4), S. 61-64, 2008 Author(s)
Trautz, Martin
Lin, Lorraine -
Source
[Book]
Mit Schrauben bewehren : Selbstbohrende Vollgewindeschrauben als Verstärkung in Brettschichtholzträgern und zur Ausbildung von hochleistungsfähigen Verbindungen
In: Forschungsbericht des Lehrstuhls für Tragkonstruktion, 2007 Author(s)
Trautz, Martin (Editor)
Koj, Christoph (Editor)
Künstler, Arne (Editor)
Weber, Felix (Editor) -
Source
[Journal Article]
Die ersten geschweißten Stahlbrücken in Deutschland - über die wechselvollen Anfänge der Schweißtechnik
In: Stahlbau, 75 (4), 287-297, 2006
[DOI: 10.1002/stab.200610029] Author(s)
Voormann, Friedmar
Pfeifer, Mathias
Trautz, Martin -
Source
[Contribution to a book]
Tragstrukturen und Konstruktionen aus Holz im Vergleich zu anderen Bauweisen
In: Hochschulpraxistage NRW Update! Neues Wissen für den Holzbau / Landesbetrieb Wals und Holz Nordrhein-Westfalen, Holzabsatzfonds der deutschen Holzwirtschaft, 7-13, 2005 Author(s)
Trautz, Martin -
Source
[Contribution to a book]
Puentes de arco del sistema Melan
In: Actas del Cuarto Congreso Nacional de Historia de la Construcción : Cádiz, 27 - 29 de enero de 2005 / Instituto Juan de Herrera, Escuela Técnica Superior de Arquitectura de Madrid ... Ed. a cargo de: Santiago Huerta. - Vol. 1, 377-388, 2005 Author(s)
Eggemann, Holger
Kurrer, Karl-Eugen -
Source
[Journal Article]
Bogenbrücken mit steifer Bewehrung : ein Beitrag zur Entwicklungsgeschichte des Systems Melan
In: Österreichische Ingenieur- und Architekten-Zeitschrift : ÖIAZ, 150 (2/3), 45-53, 2005 Author(s)
Eggemann, Holger
Kurrer, Karl-Eugen -
Source
[Book]
Colourdome : ein selbsttragender Experimentalkuppelbau aus Stahlblech
In: Dokumentation / Stahl-Informations-Zentrum 89, 2004 Author(s)
Hachul, Helmut
Hormes, Robert (Photographer) -
Source
[Book]
Der Knochen : Betrachtungen zur Knochenstatik ; Herrn Univ.-Professor Dr.-Ing. Wilfried Führer gewidmet zur Vollendung des 65. Lebensjahres und zur Emeritierung
In: Berichte aus dem Bauwesen, 2004 Author(s)
Gerhardt, Rolf
Rickert, Nicole
Rust, Janka
Thiemann, Catherine -
Source
[Journal Article]
Bildhaftes Kräftespiel. Die graphischen Methoden der Statik und ihre Beziehung zur Tragwerksform
In: Deutsche Bauzeitung : db, 138 (4), 85-91, 2004 Author(s)
Gerhardt, Rolf
Kurrer, Karl-Eugen
Pichler, Gerhard -
Source
[Journal Article]
Formfindung versus Formgebung
In: Bauwelt, 95 (21), 12-15, 2004 Author(s)
Trautz, Martin -
Source
[Journal Article, Review]
Becchi, Antonio ; Corradi, Massimilio: Essays on the History of Mechanics - In Memory of Clifford Ambrose Truesdell and Edoardo Benvenuto. - Basel [u.a.], 2003
In: Stahlbau, 73 (6), 446-448, 2004
[DOI: 10.1002/stab.200490124] Author(s)
Trautz, Martin (Reviewer) -
Source
[Journal Article, Review]
Becchi, Antonio ; Corradi, Massimilio ; Foce, Frederico [Hrsg.]: Towards a History of Construction. - Berlin [u.a.], 2002
In: Stahlbau, 73 (6), 446-448, 2004
[DOI: 10.1002/stab.200490122] Author(s)
Trautz, Martin (Reviewer) -
Source
[Journal Article]
Entwurf, Fertigung und Wirtschaftlichkeit im Stahlbau
In: Stahlbau, 73, 282-282, 2004 Author(s)
Eggemann, Holger -
Source
[Journal Article]
EinIngenieurwesen für die Gesellschaft : Bericht über den vierten spanischen Nationalkongreß des Bauingenieurwesens, 26. bis 28. November 2003, Madrid
In: Stahlbau, 73, 207-208, 2004 Author(s)
Eggemann, Holger -
Source
[Journal Article]
Eine Brücke für die Welsche Mühle in Aachen-Haaren
In: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 81, 834-836, 2004 Author(s)
Eggemann, Holger -
Source
[Contribution to a book, Contribution to a conference proceedings]
The methods of graphical statics and their relation to the structural form
In: Proceedings of the First International Congress on Construction History : Madrid, 20th - 24th January 2003 / ed. by Santiago Huerta. Instituto Juan de Herrera, Escuela Técnica Superior de Arquitectura Madrid. - Vol. 2, 997-1006, 2003 Author(s)
Gerhardt, Rolf
Kurrer, Karl-Eugen
Pichler, Gerhard -
Source
[Contribution to a book]
Gustave Eiffel
In: Lexikon der bedeutenden Naturwissenschaftler : in drei Bänden / hrsg. von Dieter Hoffmann .... - Bd 1, 459-460, 2003 Author(s)
Trautz, Martin -
Source
[Journal Article]
Die Tragkonstruktion der Gebäude für die Neue Messe in Karlsruhe
In: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 80 (11), 757-765, 2003 Author(s)
Trautz, Martin
Bollinger, Klaus -
Source
[Contribution to a book, Contribution to a conference proceedings]
Development of composite columns : emperger's effort
In: Proceedings of the First International Congress on Construction History : Madrid, 20th - 24th January 2003 / ed. by Santiago Huerta. Instituto Juan de Herrera, Escuela Técnica Superior de Arquitectura Madrid. - Vol. 2, 787-798, 2003 Author(s)
Eggemann, Holger -
Source
[Journal Article]
Fritz von Emperger : Verbundbaupionier
In: Beton- und Stahlbetonbau, 97, 701-705, 2003 Author(s)
Eggemann, Holger -
Source
[Journal Article]
EinNäherungsverfahren zur Bemessung von Verbundstützen
In: Stahlbau, 57, 797-802, 2003 Author(s)
Eggemann, Holger -
Source
[Contribution to a book]
Reflections on the Application of Graphical Methods to Statical Problems
In: Towards a history of construction : dedicated to Edoardo Benvenuto ; [ ... holding an International Seminar 'Homage to Edoardo Benvenuto in Genoa from 29th November to 1st December 1999] / Antonio Becchi ... (eds.), 377-384, 2002 Author(s)
Gerhardt, Rolf -
Source
[Book]
Anschauliche Tragwerklehre : experimentelle Darstellung von Biegemomenten mit Hilfe der Seillinie
In: Berichte aus dem Bauwesen, 2002 Author(s)
Gerhardt, Rolf -
Source
[Journal Article]
Maurice Koechlin - der eigentliche Erfinder des Eiffelturms
In: Deutsche Bauzeitung : db, 136 (4), 105-108, 2002 Author(s)
Trautz, Martin -
Source
[Journal Article, Review]
Eisenloffel, Karen [Hrsg.] ; Ermer, Ingeborg [Hrsg.] : Tragwerkstatt Gerhard Pichler. - Berlin, 2000. - ISBN: 3-7861-2279-2
In: Stahlbau, 70 (4), 305-306, 2001
[DOI: 10.1002/stab.200101020] Author(s)
Gerhardt, Rolf (Reviewer) -
Source
[Journal Article]
Seebrücke und Pegelturm Goitzsche
In: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 78 (4), 256-262, 2001 Author(s)
Trautz, Martin
Bollinger, Klaus -
Source
[Journal Article]
Nordpolbrücke Bochum
In: Stahlbau, 70 (4), 258-261, 2001
[DOI: 10.1002/stab.200100910] Author(s)
Bollinger, Klaus
Trautz, Martin -
Source
[Journal Article]
Formunvollendet: Eine Trilogie von der Suche nach der Form statisch idealer Kuppeln
In: Deutsche Bauzeitung : db, 135 (11), 105-111, 2001 Author(s)
Trautz, Martin -
Source
[Dissertation / PhD Thesis]
Räumliche Knotenstabtragwerke in Ausführung mit Kreuzbalken und Induo-Verbundankertechnik, 2001 Author(s)
Heyden, Johann-Wilhelm -
Source
[Journal Article]
Vereinfachte Bemessung von Wänden aus Mauerwerk nach Eurocode 6
In: Das Mauerwerk : Zeitschrift für Technik und Architektur, 4, 45-56, 2000 Author(s)
Eggemann, Holger
Führer, Wilfried -
Source
[Contribution to a book, Contribution to a conference proceedings]
Vorfertigung im Holzbau - eine Selbstverständlichkeit
In: Vom Baukasten zum intelligenten System : individuelles Bauen durch Vorfertigung ; Tagungsband, RWTH Aachen, 10.-11.10.2000 / Veranstalter Lehrstuhl für Baukonstruktion (Tragwerklehre)... Hrsg. Wilfried Führer ... Bearb. Matthias Molter ... / Technische Hochschule/ Lehrstuhl für Baukonstruktion (Tragwerklehre), 123-133, 2000 Author(s)
Führer, Wilfried
Eggemann, Holger -
Source
[Contribution to a book]
Geleitwort
In: Aachen : Stadtführer zeitgenössischer Architektur / [Hrsg.] Ingeborg Flagge. [In Zusammenarbeit mit dem BDA Aachen], 2-2, 1999 Author(s)
Gerhardt, Rolf -
Source
[Journal Article, Review]
Schneider, K.-J. (Hrsg.): Bautabellen für Architekten. - Düsseldorf, 1998. - ISBN:3-8041-3478-5
In: Stahlbau, 68 (1), 85-86, 1999
[DOI: 10.1002/stab.199900240] Author(s)
Gerhardt, Rolf (Reviewer) -
Source
[Contribution to a book, Contribution to a conference proceedings]
Bramante's design for the dome of St. Peter's cathedral in Rome. A study, using experimental stress analysis techniques
In: Structural studies, repairs and maintenance of historical buildings VI : [conference, Dresden, June 1999] / [organized by: Wessex Institute of Technology, UK and Technical University of Dresden, Germany] / Ed.: C. A. Brebbia ..., 1999 Author(s)
Krauss, Franz -
Source
[Contribution to a book]
Zur historischen Entwicklung der Gelenkträgersysteme sowie der graphischen Bestimmung ihrer Momentenbeanspruchung in Brückenschläge
In: Brückenschläge : Festschrift Herrn Univ.-Prof. Dr.-Ing. Wilhelm Friedrich Führer zur Vollendung des 60. Lebensjahres / [für die Fakultät Architektur Freunde des Reiff e.V., Aachen], 63-72, 1998 Author(s)
Gerhardt, Rolf -
Source
[Contribution to a book]
Zur historischen Entwicklung der Gelenkträgersysteme sowie deren graphischen Bestimmung ihrer Momentenbeanspruchungen
In: Brückenschläge - Festschrift für Herrn Univ.-Prof. Dr.-Ing. W.F. Führer zur Vollendung des 60. Lebensjahres / Freunde des Reiff e.V. Aachen, 63-71, 1998 Author(s)
Gerhardt, Rolf -
Source
[Contribution to a book, Contribution to a conference proceedings]
Leicht und Weit in Natur und Bautechnik
In: Symposium Skelett und Haut : 19. November 1998 ; [Symposium interdisziplinär] / Veranstalter: Universität Gesamthochschule Essen, Fachbereich 10 Bauwesen, Fachgebiet Konstruktive Gestaltung - Leichtbau in der Galerie Architektur und Arbeit Gelsenkirchen. [Hrsg.: Bernd Baier ...], 21, 30, 109-116, 1998 Author(s)
Führer, Wilfried
Gerhardt, Rolf
Knaack, Ulrich -
Source
[Journal Article]
Darstellung von Biegemomenten : Ihre experimentelle Ermittlung mit Hilfe der Seillinie
In: Baukultur, 1998 (6), 34-37, 1998 Author(s)
Gerhardt, Rolf -
Source
[Journal Article, Review]
Heller, Hanfried: Padia : Tragwerkslehre. - Weimar, 1998. - ISBN:3-433-02519-3
In: Stahlbau, 67 (11), 886, 1998
[DOI: 10.1002/stab.199803150] Author(s)
Gerhardt, Rolf (Reviewer) -
Source
[Dissertation / PhD Thesis]
Sichtbare Spannungen
In: Wissenschaftliche Schriften an der Fakultät für Architektur der RWTH Aachen 1, 1998 Author(s)
Weinand, Yves -
Source
[Dissertation / PhD Thesis]
ExTraCAD : Computerunterstützung des architektonischen Tragwerkentwurfs -
In: Dissertationen an der Fakultät für Architektur der RWTH Aachen : 2, Ingenieurwissenschaft 1, 1998 Author(s)
Rottke, Evelin -
Source
[Dissertation / PhD Thesis]
Konstruktiver Glasbau, 1998 Author(s)
Knaack, Ulrich
Führer, Wilfried
Wurm, Jan Christof Usiel -
Source
[Book]
Grundlagen der Tragwerklehre, 1997 Author(s)
Krauss, Franz
Führer, Wilfried
Neukäter, Hans-Joachim
Willems, Claus-Christian -
Source
[Journal Article]
Die dritte Haut aus Stahl und Glas
In: Metallhandwerk + -technik, 99 (3), 12-13, 1997 Author(s)
Knaack, Ulrich -
Source
[Contribution to a conference proceedings]
Holzbau an der Schnittstelle Architektur-Tragwerk
In: 1. Aachener Holzbautagung, Aachen, 1997 Author(s)
Führer, Wilhelm Friedrich -
Source
[Contribution to a book, Contribution to a conference proceedings]
Neue Perspektiven im Holzbau
In: Höher - leichter - weiter? : neue Entwicklungen im Hochbau ; Tagungsband RWTH Aachen, 9.10.97 - 10.10.1997 ; [Grundlagen, Entwurf und Konstruktion, Ingenieure und Architekten: ein Ziel] / Veranst. Lehrstuhl und Institut für Massivbau; Lehrstuhl für Baukonstruktion (Tragwerklehre). Hrsg. Josef Hegger; Wilfried Führer. Bearb. Jan Wurm, 1997 Author(s)
Führer, Wilhelm Friedrich -
Source
[Contribution to a book, Contribution to a conference proceedings]
Bauen mit Glas
In: Höher - leichter - weiter? : neue Entwicklungen im Hochbau ; Tagungsband RWTH Aachen, 9.10.97 - 10.10.1997 ; [Grundlagen, Entwurf und Konstruktion, Ingenieure und Architekten: ein Ziel] / Veranst. Lehrstuhl und Institut für Massivbau; Lehrstuhl für Baukonstruktion (Tragwerklehre). Hrsg. Josef Hegger; Wilfried Führer. Bearb. Jan Wurm, 1997 Author(s)
Knaack, Ulrich -
Source
[Journal Article]
Die europäische Normung und ihre Auswirkungen auf den Entwurf von Tragwerken
In: Deutsche Bauzeitschrift : DBZ, 45 (2), 125-130, 1997 Author(s)
Jürges, Thomas -
Source
[Journal Article]
Ausstellungspavillon aus Glas
In: Stahlbau, 66 (2), 89-89, 1997 Author(s)
Führer, Wilhelm Friedrich
Knaack, Ulrich -
Source
[Journal Article]
Glas-Report. Glas-Stahl-Tragwerk
In: Glas : Architektur und Technik, 1997 (3), 9-10, 1997 Author(s)
Führer, Wilhelm Friedrich
Knaack, Ulrich
Weinand, Yves -
Source
[Journal Article]
Ein Tragwerk aus Glas und Stahl. Bibliotheksfassade RWTH Aachen
In: Deutsche Bauzeitschrift : DBZ, 45 (5), 75-78, 1997 Author(s)
Führer, Wilhelm Friedrich
Knaack, Ulrich
Weinand, Yves -
Source
[Journal Article]
Transparentes Glastragwerk
In: Glas + Rahmen, 48 (3), 1997 Author(s)
Führer, Wilhelm Friedrich
Knaack, Ulrich
Weinand, Yves -
Source
[Proceedings]
Höher - leichter - weiter? : neue Entwicklungen im Hochbau ; Tagungsband RWTH Aachen, 9.10.97 - 10.10.1997 ; [Grundlagen, Entwurf und Konstruktion, Ingenieure und Architekten: ein Ziel]
In: Schriftenreihe des IMB 5, 1997 Author(s)
Hegger, Josef (Editor)
Führer, Wilfried (Editor)
Wurm, Jan Christof Usiel (Editor) -
Source
[Journal Article]
Tragende Transparenz
In: Deutsche Bauzeitung : db, 131 (4), 105-112, 1997 Author(s)
Knaack, Ulrich -
Source
[Journal Article]
Glasdach und Ausstellungspavillon
In: Glasforum : Architektur, Raumkunst, Gebrauch, 46 (1), 7-14, 1996 Author(s)
Knaack, Ulrich -
Source
[Journal Article]
Projekt Glaspavillon
In: Deutsche Bauzeitschrift : DBZ, 44 (2), 89-92, 1996 Author(s)
Knaack, Ulrich -
Source
[Journal Article]
Ausstellungspavillon in Aachen
In: Glas : Architektur und Technik, 2 (1), 39-42, 1996 Author(s)
Knaack, Ulrich -
Source
[Journal Article]
Glaspavillon - engere Wahl
In: Deutsche Bauzeitung : db, 106 (6), 1996 Author(s)
Knaack, Ulrich -
Source
[Journal Article]
Gläserner Himmel
In: AIT : Architektur, Innenarchitektur, technischer Ausbau, 104 (5), 118-119, 1996 Author(s)
Knaack, Ulrich -
Source
[Journal Article]
Ein gläserner Himmel
In: Glaswelt : Fenster, Fassade, Glas, 49 (4), 1996 Author(s)
Knaack, Ulrich -
Source
[Journal Article]
Glaspavillon
In: Baumeister : das Architektur-Magazin, 93 (8), 67-67, 1996 Author(s)
Knaack, Ulrich -
Source
[Journal Article]
Projekt Glasdach
In: Stahlbau, 65 (8), 293-293, 1996 Author(s)
Knaack, Ulrich -
Source
[Journal Article]
Transparenter Glaskubus als Ausstellungsmöglichkeit für Forschungs- und Studienarbeiten der RWTH Aachen
In: Detail, 36 (1), 40-41, 1996 Author(s)
Knaack, Ulrich -
Source
[Contribution to a book]
Frühe Holzbrückenerfindungen - Vom Balken zum Bogen
In: Prozeß und Form 'Natürlicher Konstruktionen' : der Sonderforschungsbereich 230 / hrsg. von Klaus Teichmann und Joachim Wilke, 1996 Author(s)
Trautz, Martin -
Source
[Journal Article]
Palladios Holzbrückenerfindungen aus dem dritten Buch der 'Vier Bücher zur Architektur' (1570), ein frühes Kapitel der Stabtragwerkslehre
In: Dresdener Beiträge zur Geschichte der Technikwissenschaften, 24, 63-73, 1996 Author(s)
Trautz, Martin -
Source
[Contribution to a book]
Frühe Wölbkunst und Wölbversuche nach den Regeln der Statik
In: Prozeß und Form 'Natürlicher Konstruktionen' : der Sonderforschungsbereich 230 / hrsg. von Klaus Teichmann und Joachim Wilke, 1996 Author(s)
Trautz, Martin -
Source
[Contribution to a conference proceedings]
Conceptual design in the history of architecture and bridge engineering
In: Iass-Proceedings / International Association for Shell and Spatial Structures, 1996 Author(s)
Trautz, Martin -
Source
[Journal Article]
Ein Pavillon aus Glas
In: Glaswelt : Fenster, Fassade, Glas, 49 (3), 32-33, 1996 Author(s)
Knaack, Ulrich -
Source
[Book]
Tabellen zur Tragwerklehre, 1996 Author(s)
Krauss, Franz
Führer, Wilfried
Jürges, Thomas -
Source
[Book, Proceedings]
Hochhäuser : Entwerfen, Planen, Konstruieren ; Tagungsband RWTH Aachen, 30. - 31.03.1995 ; [Entwurf, Management, Konstruktion + Tragwerk, Infrastruktur + Haustechnik, Fassaden]
In: [IMB 1], 1995 Author(s)
Hegger, Josef (Editor)
Führer, Wilfried (Editor) -
Source
[Contribution to a book]
Automation of measurement, evaluation and redesign in structural engineering
In: ICCCBE Berlin, Juli 1995, 1995 Author(s)
Niehörster, R.
Steinhage, V. -
Source
[Book]
Der Entwurf von Tragwerken : Hilfen zur Gestaltung und Optimierung ; mit 20 Tabellen, 1995 Author(s)
Führer, Wilfried
Ingendaaij, Susanne
Stein, Friedhelm -
Source
[Book]
Grundlagen der Tragwerklehre, 1995 Author(s)
Krauss, Franz
Führer, Wilfried
Neukäter, Hans-Joachim -
Source
[Book]
Novalis und die Tragwerklehre, 1995 Author(s)
Führer, Wilfried -
Source
[Journal Article]
Ein Pavillon aus Glas - 125 Jahre RWTH Aachen
In: Glas-Verarbeitung : die Fachzeitschrift für bearbeiten, veredeln, Logistik, Einbau von Glas, 2 (11), 1995 Author(s)
Führer, Wilfried
Knaack, Ulrich -
Source
[Journal Article]
Stegreif und Installation
In: Seiltanz : Zeitschrift für aktuelle Musik, 1995 (4), 1995 Author(s)
Weinand, Yves -
Source
[Contribution to a book, Contribution to a conference proceedings]
Structural studies on Antonellis San Gaudenzio
In: Spatial structures: heritage, present and future : proceedings of the IASS international symposium 1995, June 5 - 9, 1995, Milano, Italia / jointly organized by: IASS, International Association for Shell and Spatial Structures; ISMES, Istituto Sperimentale Modelli e Strutture ... Ed.: Gian Carlo Giuliani. - Vol. 1-2, 1995 Author(s)
Trautz, Martin
Ramm, Ekkehard -
Source
[Dissertation / PhD Thesis]
Experimentelle Momenten-Darstellung : Darstellung der Biegebeanspruchung ebener Tragwerke durch die Seillinie -, 1989 Author(s)
Gerhardt, Herbert-Rolf