[Contribution to a book, Contribution to a conference proceedings]
Growing Construction Components : Design and simulation strategy for self-formation following tree growth
In: Anthropologic - architecture and fabrication in the cognitive age : eCAADe 2020 : proceedings, the 38th Conference on Education and Research in Computer Aided Architectural Design in Europe : online conference, 16th-17th September 2020, Berlin, Germany, Institute of Architecture, Technische Universität Berlin / edited by Liss C. Werner, Dietmar Koering. - Volume 2, 51-59, 2020

Moreno Gata, Kevin (Corresponding author)
Musto, Juan
Trautz, Martin (Corresponding author)

[Journal Article]
Deep Drilling of Structural Timber with High Power Ultrashort Pulsed Laser Radiation
In: Journal of Laser Micro/Nanoengineering, 15 (3), 195-203, 2020
[DOI: 10.2961/jlmn.2020.03.2007]

Bornschlegel, Benedikt (Corresponding author)
Haasler, Dennis
Finger, Johannes
Grizmann, Denis
Trautz, Martin
Gillner, Arnold

[Contribution to a book, Contribution to a conference proceedings]
Form finding of stress adapted folding as a lightweight structure under different load cases
In: Form and Force : IASS Symposium 2019 - 60th Anniversary Symposium of the International Association for Shell and Spatial Structures/Structural Membranes 2019 - 9th International Conference on Textile Composites and Inflatable Structures : Barcelona, Spain, October 7-10, 2019 / Carlos Lázaro, Kai-Uwe Bletzinger and Eugenio Oñate (eds.) ; the conference organizers acknowledge the support of the following organizations: International Association for Shell and Spatial Structures (IASS), European Community on Computational Methods in Applied Sciences (ECCOMAS), International Association for Computational Mechanics (IACM), Asociación Española de Ingeniería Estructural, Universitat Politècnica de Catalunya (UPC), International Centre for Numerical Methods in Engineering (CIMNE) - Spain, E.T.S. Ingeniería de Caminos, C.y.P. (UPV), 2535-2542, 2019

Musto, Juan (Corresponding author)
Lyon, Max
Trautz, Martin
Kobbelt, Leif

[Contribution to a book, Contribution to a conference proceedings]
Architectural ceramics influenced by structured materials
In: Form and Force : IASS Symposium 2019 - 60th Anniversary Symposium of the International Association for Shell and Spatial Structures/Structural Membranes 2019 - 9th International Conference on Textile Composites and Inflatable Structures : Barcelona, Spain, October 7-10, 2019 / Carlos Lázaro, Kai-Uwe Bletzinger and Eugenio Oñate (eds.) ; the conference organizers acknowledge the support of the following organizations: International Association for Shell and Spatial Structures (IASS), European Community on Computational Methods in Applied Sciences (ECCOMAS), International Association for Computational Mechanics (IACM), Asociación Española de Ingeniería Estructural, Universitat Politècnica de Catalunya (UPC), International Centre for Numerical Methods in Engineering (CIMNE) - Spain, E.T.S. Ingeniería de Caminos, C.y.P. (UPV), 1696-1703, 2019

Saez, Dana Laura (Corresponding author)
Musto, Juan
Trautz, Martin

[Contribution to a book, Contribution to a conference proceedings]
Design and Analysis of Freeform Shell Structures Composed of Doubly Curved Sheet Metal Panels
In: Form and Force : IASS Symposium 2019 - 60th Anniversary Symposium of the International Association for Shell and Spatial Structures/Structural Membranes 2019 - 9th International Conference on Textile Composites and Inflatable Structures : Barcelona, Spain, October 7-10, 2019 / Carlos Lázaro, Kai-Uwe Bletzinger and Eugenio Oñate (eds.) ; the conference organizers acknowledge the support of the following organizations: International Association for Shell and Spatial Structures (IASS), European Community on Computational Methods in Applied Sciences (ECCOMAS), International Association for Computational Mechanics (IACM), Asociación Española de Ingeniería Estructural, Universitat Politècnica de Catalunya (UPC), International Centre for Numerical Methods in Engineering (CIMNE) - Spain, E.T.S. Ingeniería de Caminos, C.y.P. (UPV), 60-67, 2019

Seiter, Alex Josef (Corresponding author)
Pofahl, Thorsten Christian
Trautz, Martin
Reitmaier, Lisa-Marie
Hirt, Gerhard

[Dissertation / PhD Thesis]
Folded plate structures : Geometry, mechanics, design, 1 Online-Ressource (xix, 123 Seiten) : Illustrationen, Diagramme, 2019

Della Puppa, Giovanni

[Journal Article]
A Unified Representation of Folded Surfaces via Fourier Series
In: Nexus network journal : NNJ, 21 (3), 491-526, 2019
[DOI: 10.1007/s00004-019-00456-1]

Della Puppa, Giovanni (Corresponding author)
Sauer, Roger Andrew
Trautz, Martin

[Journal Article]
Beanspruchungsoptimierte Faltungen aus Stahl für selbsttragende Raumfaltwerke
In: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 96 (12), 902-911, 2019
[DOI: 10.1002/bate.201900024]

Musto, Juan (Corresponding author)
Lyon, Max
Trautz, Martin
Kobbelt, Leif

[Contribution to a book, Contribution to a conference proceedings]
Prozesskette aus Streckziehen und Inkrementeller Blechumformung für die Fertigung mehrsinnig gekrümmter Feinblechpaneele
In: Ideen Form geben : 33. ASK Umformtechnik, 28.-29. März 2019, Eurogress Aachen : Tagungsband / Gerhard Hirt (Hrsg.), 147-156, 2019

Reitmaier, Lisa-Marie (Corresponding author)
Bailly, David
Hirt, Gerhard
Pofahl, Thorsten Christian
Seiter, Alex
Trautz, Martin

[Poster]
Development of a Thick Plate Folding Mechanism as a Cover for a 3D printer
In: 7th International Meeting on Origami in Science, Mathematics and Education Oxford 2018-09-05 - 2018-09-07, 2018
[DOI: 10.13140/RG.2.2.23088.40966]

Siebrecht, Justus (Corresponding author)
Jacobs, Georg
Dehn, Simon
Spütz, Kathrin
Weigel, Chantal Denise (Corresponding author)
Hoffmann, Susanne
Buffart, Henri
Trautz, Martin
Paris, Jascha Norman
Corves, Burkhard

[Preprint]
Karolingische Tonnengewölbe im Aachener Dom : Baugeschichte, Konstruktion und Technik, 2018

Raabe, Christian
Trautz, Martin
Di Pumpo, Carlaluisa

[Contribution to a book, Contribution to a conference proceedings]
Comparison and Derivable Benefits of Technical Folding
In: Digitalisierung und Produktentwicklung - vernetzte Entwicklungsumgebungen : 16. Gemeinsames Kolloquium Konstruktionstechnik : am 11. und 12. Oktober 2018 in Bayreuth : Tagungsband / Hrsg.: Klaus Brökel, Burkhard Corves, Karl-Heinrich Grote, Armin Lohrengel, Norbert Müller, Arun Nagarajah, Frank Rieg, Gerhard Scharr, Ralph Stelzer, 361-372, 2018

Weigel, Chantal Denise
Jacobs, Georg
Katzwinkel, Tim
Merz, Judith
Paris, Jascha Norman
Corves, Burkhard
Buffart, Henri
Hoffmann, Susanne
Trautz, Martin

[Contribution to a book, Contribution to a conference proceedings]
Technische Faltung : ein praktischer Entwicklungsansatz
In: Digitalisierung und Produktentwicklung - vernetzte Entwicklungsumgebungen : 16. Gemeinsames Kolloquium Konstruktionstechnik : am 11. und 12. Oktober 2018 in Bayreuth : Tagungsband / Hrsg.: Klaus Brökel, Burkhard Corves, Karl-Heinrich Grote, Armin Lohrengel, Norbert Müller, Arun Nagarajah, Frank Rieg, Gerhard Scharr, Ralph Stelzer, 349-360, 2018

Weigel, Chantal Denise
Jacobs, Georg
Katzwinkel, Tim
Siebrecht, Justus
Merz, Judith
Paris, Jascha Norman
Corves, Burkhard
Buffart, Henri
Hoffmann, Susanne
Trautz, Martin

[Journal Article]
Robofakturen : Fabriktypen für die Industrie 4.0
In: wt Werkstattstechnik online, 108 (9), 586-591, 2018

Trautz, Martin (Corresponding author)
Moser, Franziska Julia

[Contribution to a book, Contribution to a conference proceedings]
On Using Tessellation Properties for the Development of Classifying Criteria for Foldable Mechanisms
In: Origami 7 : the proceedings from the 7th International Meeting on Origami Science, Mathematics, and Education / Editorial board Robert J. Lang [und 16 Weitere]. - Volume 4: Engineering Two, 1103-1118, 2018

Siebrecht, Justus
Jacobs, Georg
Weigel, Chantal Denise
Dehn, Simon
Buffart, Henri
Hoffmann, Susanne
Paris, Jascha Norman
Trautz, Martin
Corves, Burkhard

[Contribution to a book, Contribution to a conference proceedings]
Kinematic and Kinetostatic Classification for Motion-Task-Oriented Synthesis of Folding Mechanisms
In: Origami 7 : the proceedings from the 7th International Meeting on Origami Science, Mathematics, and Education / Editorial board Robert J. Lang [und 16 Weitere]. - Volume 4: Engineering Two, 1069-1086, 2018

Paris, Jascha Norman
Merz, Judith
Buffart, Henri
Hoffmann, Susanne
Siebrecht, Justus
Weigel, Chantal Denise
Hüsing, Mathias
Trautz, Martin
Corves, Burkhard

[Contribution to a book, Contribution to a conference proceedings]
Educational Concepts for Developing and Designing Origami-Based Structures
In: Origami 7 : the proceedings from the 7th International Meeting on Origami Science, Mathematics, and Education / Editorial board Robert J. Lang [und 16 Weitere]. - Volume 1: Design, Education, History, and Science, 241-256, 2018

Hoffmann, Susanne
Buffart, Henri
Paris, Jascha Norman
Merz, Judith
Siebrecht, Justus
Weigel, Chantal Denise
Corves, Burkhard
Trautz, Martin

[Contribution to a book, Contribution to a conference proceedings]
Folding Mechanisms with Discriminate Extremal Configurations for Structural Purposes
In: Origami 7 : the proceedings from the 7th International Meeting on Origami Science, Mathematics, and Education / Editorial board Robert J. Lang [und 16 Weitere]. - Volume 3: Engineering One, 685-698, 2018

Buffart, Henri
Hoffmann, Susanne
Paris, Jascha Norman
Weigel, Chantal Denise
Siebrecht, Justus
Corves, Burkhard
Trautz, Martin

[Contribution to a conference proceedings]
Bond behavior of axially loaded inclined self-tapping screws in glulam
In: [7. Doktorandenkolloquium „Holzbau Forschung und Praxis“, 2018-03-08 - 2018-03-09, Stuttgart, Germany], 175-182, 2018

Pranjic, Andrija (Corresponding author)

[Contribution to a conference proceedings]
Structural tree growth optimization
In: [World Conference on Timber Engineering 2018, WCTE, 2018-08-20 - 2018-08-24, Seoul, Korea], 2018

Pranjic, Andrija (Corresponding author)
Trautz, Martin
Della Puppa, Giovanni

[Contribution to a conference proceedings]
Residual load-bearing capacity of self-tapping screws after long-term load
In: Proceedings of the IASS Symposium 2018 Creativity in Structural Design : July 16-20, 2018, Boston, USA / Caitlin Mueller, Sigrid Adraenssens (eds.), 160, 2018

Koj, Christoph (Corresponding author)
Trautz, Martin
Grizmann, Denis
Pranjic, Andrija

[Journal Article]
Der verschwundene Ingenieur
In: Stahlbau, 87 (7), 706-717, 2018
[DOI: 10.1002/stab.201810600]

Trautz, Martin (Corresponding author)

[Dissertation / PhD Thesis]
Wandelbare Faltkonstruktionen aus ebenen, quasi-starren Flächenelementen von nicht vernachlässigbarer Dicke, 1 Online-Ressource (VIII, 171 Seiten) : Illustrationen, Diagramme, 2017

Künstler, Arne

[Book]
Körperwissen : Vom Inneren zum Äußeren, 66 Seiten : Illustrationen, 2017

Schmitz, Thomas Heinrich
Dlugaiczyk, Martina (Corresponding author)
Prescher, Andreas
Gerhardt, Rolf (Corresponding author)
Neuefeind, Anja (Contributor)
Binding, Stephanie (Contributor)

[Journal Article]
Life cycle assessment and sustainable engineering in the context of near net shape grown components : striving towards a sustainable way of future production
In: Environmental sciences Europe : ESEU, 29 (1), 27, 2017
[DOI: 10.1186/s12302-017-0125-x]

Kämpfer, Christoph (Corresponding author)
Seiler, Thomas-Benjamin (Corresponding author)
Beger, Anna-Lena
Jacobs, Georg
Löwer, Manuel
Moser, Franziska Julia
Reimer, Julia Jessica
Trautz, Martin
Usadel, Björn
Wormit, Alexandra
Hollert, Henner

[Journal Article]
Das Dehnungs- und Tragverhalten von Brettschichtholz beim Lasteintrag durch Vollgewindeschrauben
In: Bautechnik, 94 (11), 776-789, 2017
[DOI: 10.1002/bate.201700068]

Trautz, Martin (Corresponding author)

[Report]
Fügung und Verstärkung von Brettschichtholzbauteilen mit ab initio eingeklebten Stahlblechlamellen, 80, A85 Seiten, 2017

Trautz, Martin
Koj, Christoph
Pranjic, Andrija

[Contribution to a conference proceedings]
Structural tree growth optimization
In: [IASS Annual Symposium 2017 'Interfaces: Architecture, Engineering, Science', IASS 2017, 2017-09-25 - 2017-09-28, Hamburg, Germany], 2017

Pranjic, Andrija (Corresponding author)
Della Puppa, Giovanni
Trautz, Martin

[Contribution to a conference proceedings]
A generalized description of fold geometry
In: Proceedings of the IASS Annual Symposium 2017 "Interfaces: Architecture, Engineering, Science" : September 25 - 28th, Hamburg, Germany / Annette Bögle, Manfred Grohmann (eds.), 2017

Della Puppa, Giovanni (Corresponding author)
Trautz, Martin

[Contribution to a conference proceedings]
Stress oriented foldings as an optimized lightweight system
In: Proceedings of the IASS Annual Symposium 2017 "Interfaces: Architecture, Engineering, Science" : September 25 - 28th, Hamburg, Germany / Annette Bögle, Manfred Grohmann (eds.), [1]-8, 2017

Musto, Juan (Corresponding author)
Trautz, Martin

[Contribution to a conference proceedings]
Non-flat folding mechanisms for structural purposes
In: Proceedings of the IASS Annual Symposium 2017 "Interfaces: Architecture, Engineering, Science" : September 25 - 28th, Hamburg, Germany / Annette Bögle, Manfred Grohmann (eds.), [1]-8, 2017

Buffart, Henri (Corresponding author)
Hoffmann, Susanne
Paris, Jascha Norman
Siebrecht, Justus
Corves, Burkhard
Trautz, Martin

[Contribution to a book, Contribution to a conference proceedings]
Klassifikation und zielgerichtete Entwicklung von wandelbaren Faltkonstruktionen
In: [12. Kolloquium Getriebetechnik, 2017-09-20 - 2017-09-22, Dresden, Germany / Michael Beitelschmidt (Herausgeber)], 2017

Paris, Jascha Norman (Corresponding author)
Gottschalk, Marcel
Buffart, Henri
Hoffmann, Susanne
Siebrecht, Justus
Hüsing, Mathias
Jacobs, Georg
Trautz, Martin
Corves, Burkhard

[Abstract, Contribution to a conference proceedings]
IDFP - interdisciplinary factory planning: the RWTH Aachen University model
In: [International Association for Shell & Spatial Structures 2017: INTERFACES. architecture. engineering.science, IASS 2017, 2017-09-25 - 2017-09-28, Hamburg, Germany], 263, 2017

Hoffmann, Susanne (Corresponding author)
Moser, Franziska Julia
Osterhage, Tanja
Marks, Alexander Frederik
Ansorge, Katrin
Wolisz, Henryk Stefan
Huppertz, René
Trautz, Martin
Burggräf, Peter
Müller, Dirk
Osebold, Rainard
Dannapfel, Matthias

[Contribution to a conference proceedings]
Industrial building design studios - an effective tool for the structural education of architects
In: [The Annual Symposium of the International Association for Shell and Spatial Structures, IASS 2017, 2017-09-25 - 2017-09-28, Hamburg, Germany], 2017

Moser, Franziska Julia (Corresponding author)
Musto, Juan
Trautz, Martin

[Conference Presentation]
Mensch-Roboter Interaktion - Räumliche Anforderungen an Fabrikgebäude der Industrie 4.0
In: 23. Industriebauseminar Wien 2017-09-11 - 2017-09-12, 11 Folien, 2017

Moser, Franziska Julia (Corresponding author)

[Contribution to a conference proceedings]
Fungal mycelium as a building material
In: [The annual symposium of the International Association for Shell and Spatial Structures, IASS 2017, 2017-09-25 - 2017-09-28, Hamburg, Germany], 2017

Moser, Franziska Julia (Corresponding author)
Trautz, Martin
Beger, Anna-Lena
Löwer, Manuel
Jacobs, Georg
Hillringhaus, Felicitas
Wormit, Alexandra
Usadel, Björn
Reimer, Julia Jessica

[Contribution to a book, Contribution to a conference proceedings]
The potential of naturally grown bent bamboo structures : quantifying the effect of thermal bending on their tensile strength
In: M2D2017 Progress in Mechanics and Materials in Design / Eds.: J.F. Silva Gomes, Shaker A. Meguid, 297-298, 2017

Beger, Anna-Lena
Merkord, F.
Löwer, Manuel
Schäfer, Malte
Jacobs, Georg
Moser, Franziska Julia
Trautz, Martin
Reimer, Julia Jessica
Wormit, Alexandra
Usadel, Björn
Kämpfer, Christoph
Seiler, Thomas-Benjamin
Hollert, Henner

[Report]
Konstruktionsvorschläge für überdachte Mobilstationen unter Verwendung inkrementell umgeformter Blechpaneele : Untersuchung im Rahmen des Projekts Mobility Broker zur Förderung der Elektromobilität, 56 Seiten, 2017

Buffart, Henri
Della Puppa, Giovanni
Koj, Christoph
Gerhardt, Rolf
Trautz, Martin (Corresponding author)

[Journal Article]
Strong Formulation IsoGeometric Analysis for the vibration of thin membranes of general shape
In: International journal of mechanical sciences, 120, 322-340, 2016
[DOI: 10.1016/j.ijmecsci.2016.10.033]

Fantuzzi, Nicholas
Della Puppa, Giovanni
Tornabene, Francesco (Corresponding author)
Trautz, Martin

[Contribution to a conference proceedings]
Reinforcement of glulam with ab intio embedded steel sheets for high-performance joints
In: [IASS Annual Symposium 2016 'Interfaces: Architecture, Engineering, Science', IASS 2016, 2016-09-26 - 2016-09-30, Tokyo, Japan], 2016

Pranjic, Andrija
Koj, Christoph
Trautz, Martin

[Contribution to a book, Contribution to a conference proceedings]
Reinforcing glued laminated timber with ab initio embedded steelsheets
In: WCTE 2016 : World Conference on Timber Engineerng : August 22-25, 2016, Vienna, Austria : CD-ROM proceedings / Technische Universität Wien/Vienna University of Technology; Institute for Architectural Sciences, Department of Structural Design and Timber Engineering, Vienna University of Technology; Institute for Mechanics of Materials and Structures ; chairs: Wolfgang Winter, Josef Eberhardsteiner, Françoise-Hélène Jourda, 5017-5025, 2016

Pranjic, Andrija
Koj, Christoph
Trautz, Martin

[Lecture]
Interdisziplinäre Fabrikplannung - WiSe 2015/16, 2016

Trautz, Martin
Moser, Franziska Julia
Cokcan, Baris
Hoffmann, Susanne
Burggräf, Peter
Marks, Alexander Frederik
Osebold, Rainard
Huppertz, René
Müller, Dirk
Osterhage, Tanja
Ansorge, Katrin

[Talk (non-conference)]
Industriebau und Gebäudeplanung
In: RWTH Zertifikatkurs Fabrikplanung, 2016

Trautz, Martin
Moser, Franziska

[Contribution to a book, Contribution to a conference proceedings]
Muss altes Eisen immer nur Schrottwert haben?
In: Bestandsaufnahme : 1. Jahrestagung der Gesellschaft für Bautechnikgeschichte in Aachen 2013, 57-62, 2016

Trautz, Martin

[Contribution to a book, Contribution to a conference proceedings]
Self-Supporting Free-Form Structures Made of Individual Sheet Metal Panels
In: [11th Conference on Advanced Building Skins, ABS, 10.10.2016-11.10.2016, Bern, Switzerland], 2016

Pofahl, Thorsten Christian (Corresponding author)
Bailly, David
Schmitz, Roman Ulrich Christopher
Trautz, Martin
Hirt, Gerhard

[Book, Proceedings]
Bestandsaufnahme - 1. Jahrestagung der Gesellschaft für Bautechnikgeschichte in Aachen 2013
In: 1. Jahrestagung der Gesellschaft für Bautechnikgeschichte Aachen 2013-11-07 - 2013-11-09, 74 Seiten : Illustrationen, grafische Darstellungen, 2016

Trautz, Martin (Editor)

[Contribution to a book, Contribution to a conference proceedings]
Analyse wandelbarer, starrer Faltstrukturen mit Anwendungsbeispielen
In: Die Basis der Vielfalt : Geometrie als Grundlage und Anregung des Denkens / Udo Beyer (Hrsg.), 191-206, 2016
[DOI: 10.1007/978-3-658-14126-4_12]

Brakhage, Karl-Heinz
Buffart, Henri

[Journal Article]
Verbundverhalten von Vollgewindeschrauben in Brettschichtholzbauteilen: Teil 2: Analytische und numerische Untersuchungen sowie die Ableitung eines Verbundmodells zur Berechnung der Verankerungslänge
In: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 93 (11), 817-827, 2016
[DOI: 10.1002/bate.201500086]

Ayoubi, Mazen (Corresponding author)

[Abstract]
Shape Optimization of Grid Structures by Bending Moment Minimization
In: 4th European Conference on Computational Optimization Leuven 2016-09-12 - 2016-09-14, 2016

Della Puppa, Giovanni
Trautz, Martin
Stefano, Lenci

[Contribution to a conference proceedings]
Shape optimization of gridshells by bending moment minimization
In: Proceedings of the International Association for Shell and Spatial Structures (IASS) Symposium 2016, 2016

Della Puppa, Giovanni
Trautz, Martin
Lenci, Stefano