Publikationen
Treffer 1 - 50 von 244 Ergebnissen
Blättern
- Sie sind auf Seite:1-50
- 51-100
- 101-150
- letzte Seite
- nächste Seite
-
QuelleAutor(en)
-
[Doktorarbeit]
Formfindung und Potential beanspruchungsadaptiver Faltungen, 2022
[DOI: 10.18154/RWTH-2023-01104]Musto, Juan -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Scan2FEM: From Point Clouds to Structured 3D Models Suitable for Simulation
In: [EUROGRAPHICS Workshop on Graphics and Cultural Heritage (2022) / R. Pintus and F. Ponchio (Editors)], [1]-10, 2022
[DOI: 10.2312/GCH.20221215]Selman, Zain (Corresponding author)
Musto, Juan
Kobbelt, Leif -
[Fachzeitschriftenartikel]
Karosseriebautechnik für die Architektur
In: Detail / Deutsche Ausgabe, 7/8, 22-25, 2022Trautz, Martin
Pofahl, Thorsten Christian
Seiter, Alex Josef -
[Fachzeitschriftenartikel]
Neue Baumaterialien für die Bioökoomie. Das Potenzial von Pilzen
In: RWTH-Themen, 1, 34-39, 2022Saez, Dana Laura
Grizmann, Denis
Trautz, Martin
werner, anett -
[Beitrag zu einem Tagungsband, Fachzeitschriftenartikel]
Mycelium-based construction materials for the post-oil era
In: Chemie - Ingenieur - Technik : CIT, 94 (9), V4.16, 2022
[DOI: 10.1002/cite.202255061]Saez, Dana Laura (Corresponding author)
Grizmann, Denis
Trautz, Martin
Werner, Anett -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Vorbohren für Vollgewindeschrauben mittels Laserstrahlung
In: 1. Fachkongress Konstruktiver Ingenieurbau : Kompetenz-Plattform für die bautechnische Gesamtplanung / Irmgard Lochner-Aldinger, Technische Akademie Esslingen e. V., 275-280, 2022Grizmann, Denis
Pranjic, Andrija
Trautz, Martin -
[Fachzeitschriftenartikel]
Myzelkomposit als vielseitig einsetzbarer, kreislaufgerechter Werkstoff für das Bauen
In: nbau : nachhaltig bauen, 1 (2), 37-45, 2022Trautz, Martin
Saez, Dana Laura
Grizmann, Denis
Werner, Anett -
[Buchbeitrag, Fachzeitschriftenartikel]
Exploring the Binding Capacity of Mycelium and Wood-Based Composites for Use in Construction
In: Biomimetics : open access journal, 7 (2), 78, 2022
[DOI: 10.3390/biomimetics7020078]Saez, Dana Laura (Corresponding author)
Grizmann, Denis
Trautz, Martin
Werner, Anett -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Building materials from wood and fungal mycelium for load-bearing structures
In: 1. Fachkongress Konstruktiver Ingenieurbau : Kompetenz-Plattform für die bautechnische Gesamtplanung, 259-264, 2022Saez, Dana Laura
Grizmann, Denis
Trautz, Martin
Werner, Anett -
[Fachzeitschriftenartikel]
Leichtbaukonstruktionen aus Feinblech
In: Stahlbau, 91 (6), 375-384, 2022
[DOI: 10.1002/stab.202200015]Trautz, Martin
Pofahl, Thorsten Christian
Seiter, Alex Josef (Corresponding author)
Hirt, Gerhard
Reitmaier, Lisa-Marie
Bailly, David -
[Fachzeitschriftenartikel]
Laser predrilling for high-precision positioning and installation of fully threaded screws in glued-laminated timber (glulam)
In: Wood material science and engineering, 2022
[DOI: 10.1080/17480272.2022.2051735]Trautz, Martin (Corresponding author)
Grizmann, Denis
Pranjic, Andrija
Raupach, Michael
Glawe, Clarissa
Gillner, Arnold
Bornschlegel, Benedikt
Haasler, Dennis -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Integration of Algorithm-based Optimization into the Design Process of Industrial Buildings: A Case Study
In: Proceedings of the 2021 DigitalFUTURES : The 3rd International Conference on Computational Design and Robotic Fabrication (CDRF 2021) / Philip F. Yuan, Hua Chai, Chao Yan, Neil Leach, editors, 179-188, 2021
[DOI: 10.1007/978-981-16-5983-6_17]Konrad, Mirjam (Corresponding author)
Saez, Dana Laura (Corresponding author)
Trautz, Martin -
[Beitrag zu einem Tagungsband]
DI-Terial - Development of Sensory-Informed Design-to-Fabrication Processes for the Efficient Use and Robotic Production of Discarded One-Off Hardwood Elements
In: [World Conference on Timber Engineering, WCTE, 2021-08-09 - 2021-08-12], 8 Seiten, 2021Amtsberg, Felix (Corresponding author)
Moreno Gata, Kevin (Corresponding author)
Huang, Yijiang (Corresponding author)
Marshall, Daniel (Corresponding author)
Mueller, Caitlin (Corresponding author) -
[Fachzeitschriftenartikel]
Nachruf für Univ.-Prof. Dr.-Ing. em. Franz Krauss (1928-2021)
In: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 98 (6), 457-457, 2021Trautz, Martin -
[Fachzeitschriftenartikel, Rezension]
Statik und Tragwerklehre für Architekten
In: Der @Bausachverständige, 17 (6), 78-79, 2021Trautz, Martin -
[Doktorarbeit]
Demonstrationsfabriken : Eine gebäudetypologische Untersuchung, 2021
[DOI: 10.18154/RWTH-2021-11785]Moser, Franziska Julia -
[Beitrag zu einem Tagungsband]
Long-term behaviour and residual load-bearing capacity of the self-tapping screws
In: [World Conference on Timber Engineering, WCTE, 2021-08-09 - 2021-08-12, online], 2021Pranjic, Andrija (Corresponding author)
Grizmann, Denis
Trautz, Martin
Arboleda, Carlos -
[Beitrag zu einem Tagungsband]
Laser-drilled Guideholes for self-tapping-screws - Recent developments
In: [World Conference on Timber Engineering, WCTE, 2021-08-09 - 2021-08-12, online], 7 Seiten, 2021Grizmann, Denis (Corresponding author)
Pranjic, Andrija (Corresponding author)
Haasler, Dennis (Corresponding author)
Bornschlegel, Benedikt (Corresponding author)
Glawe, Clarissa (Corresponding author)
Trautz, Martin (Corresponding author) -
[Beitrag zu einem Tagungsband]
Developing Sandwich Panels with a Mid-layer of Fungal Mycelium Composite for a Timber Panel Construction System
In: [World Conference on Timber Engineering, WCTE, 2021-08-09 - 2021-08-12, online], 7 Seiten, 2021Saez, Dana Laura
Grizmann, Denis
Trautz, Martin
Werner, Anett -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Repair it with additive manufacturing: an approach to the circular economy in architectural education
In: Inspiring the next generation : conference proceedings : the 7th International Conference on Spatial Structures and the Annual Symposium of the IASS / edited by: Alireza Behnejad, Gerard Parke and Omidali Samavati, 278-284, 2021Saez, Dana Laura (Corresponding author)
Moreno Gata, Kevin
Trautz, Martin -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Analyzing a fungal mycelium and chipped wood composite for use in construction
In: Inspiring the next generation : conference proceedings : the 7th International Conference on Spatial Structures and the Annual Symposium of the IASS / edited by: Alireza Behnejad, Gerard Parke and Omidali Samavati, 555-565, 2021Saez, Dana Laura (Corresponding author)
Grizmann, Denis
Trautz, Martin
Werner, Anett -
[Beitrag zu einem Tagungsband]
Study and Simulation of Self-formation for Local Tree Growth
In: [World Conference on Timber Engineering, WCTE, 2021-08-09 - 2021-08-12, online], 7 Seiten, 2021Moreno Gata, Kevin (Corresponding author)
Musto, Juan (Corresponding author)
Pranjic, Andrija (Corresponding author)
Trautz, Martin (Corresponding author) -
[Beitrag zu einem Tagungsband]
Guiding the Tree Growth for Timber Structures Design
In: [World Conference on Timber Engineering, WCTE, 2021-08-09 - 2021-08-12, online], 6 Seiten, 2021Moreno Gata, Kevin (Corresponding author)
Grizmann, Denis (Corresponding author)
Trautz, Martin (Corresponding author) -
[Beitrag zu einem Tagungsband]
DI-Terial - Development of Sensory-Informed Design-to-Fabrication Processes for the Efficient Use and Robotic Production of Discarded One-Off Hardwood Elements
In: [World Conference on Timber Engineering, WCTE, 2021-08-09 - 2021-08-12, online], 8 Seiten, 2021Amtsberg, Felix (Corresponding author)
Moreno Gata, Kevin (Corresponding author)
Huang, Yijiang (Corresponding author)
Marshall, Daniel (Corresponding author)
Mueller, Caitlin (Corresponding author) -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Structural Up-cycling : Matching Digital and Natural Geometry
In: Advances in Architectural Geometry 2020 / Olivier Bavarel, Cyril Douthe, Romain Mesnil, Caitlin Mueller, Helmut Pottmann, Tomohiro Tachi Editors, 486-505, 2021Amtsberg, Felix
Huang, Yijiang
Marshall, Daniel
Moreno Gata, Kevin
Mueller, Caitlin -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Sheet Metal Shells
In: 14. Baustatik Baupraxis. -23. und 24. März 2020, Universität Stuttgart / Herausgeber: Manfred Bischoff, Malte von Scheven, 439-446, 2020Seiter, Alex Josef
Pofahl, Thorsten Christian
Trautz, Martin
Reitmaier, Lisa-Marie
Bailly, David
Hirt, Gerhard -
[Bericht]
Bond behaviour of fully threaded screws with long bonding lengths used as reinforcement in glue laminated timber - long-term behaviour, 2020Pranjic, Andrija
Trautz, Martin -
[Beitrag zu einem Tagungsband]
Extended three-phase bond behavior model between glulam wood matrix and axially loaded inclined self-tapping screws
In: Doktorandenkolloquium Holzbau Forschung + Praxis Stuttgart, 05. + 06. März 2020 / Herausgeber: Prof. Dr.-Ing. Ulrike Kuhlmann [und 3 weitere], 135-142, 2020Pranjic, Andrija -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Growing Construction Components : Design and simulation strategy for self-formation following tree growth
In: Anthropologic - architecture and fabrication in the cognitive age : eCAADe 2020 : proceedings, the 38th Conference on Education and Research in Computer Aided Architectural Design in Europe : online conference, 16th-17th September 2020, Berlin, Germany, Institute of Architecture, Technische Universität Berlin / edited by Liss C. Werner, Dietmar Koering. - Volume 2, 51-59, 2020Moreno Gata, Kevin (Corresponding author)
Musto, Juan
Trautz, Martin (Corresponding author) -
[Fachzeitschriftenartikel]
Deep Drilling of Structural Timber with High Power Ultrashort Pulsed Laser Radiation
In: Journal of Laser Micro/Nanoengineering, 15 (3), 195-203, 2020
[DOI: 10.2961/jlmn.2020.03.2007]Bornschlegel, Benedikt (Corresponding author)
Haasler, Dennis
Finger, Johannes
Grizmann, Denis
Trautz, Martin
Gillner, Arnold -
[Beitrag zu einem Tagungsband]
Wenn man mit Schrauben bewehren will
In: Tagungsband 4. Aachener Holzbautagung 2019, 12. und 13. September an der FH Aachen / Herausgeber: Prof. Dr.-Ing. Thomas Uibel, Prof. Dr.-Ing. Leif Arne Peterson ; gefördert vom AFH, Aachener Freundeskreis der Holzingenieure e.V., 20-33, 2019Trautz, Martin -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Form finding of stress adapted folding as a lightweight structure under different load cases
In: Form and Force : IASS Symposium 2019 - 60th Anniversary Symposium of the International Association for Shell and Spatial Structures/Structural Membranes 2019 - 9th International Conference on Textile Composites and Inflatable Structures : Barcelona, Spain, October 7-10, 2019 / Carlos Lázaro, Kai-Uwe Bletzinger and Eugenio Oñate (eds.) ; the conference organizers acknowledge the support of the following organizations: International Association for Shell and Spatial Structures (IASS), European Community on Computational Methods in Applied Sciences (ECCOMAS), International Association for Computational Mechanics (IACM), Asociación Española de Ingeniería Estructural, Universitat Politècnica de Catalunya (UPC), International Centre for Numerical Methods in Engineering (CIMNE) - Spain, E.T.S. Ingeniería de Caminos, C.y.P. (UPV), 2535-2542, 2019Musto, Juan (Corresponding author)
Lyon, Max
Trautz, Martin
Kobbelt, Leif -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Architectural ceramics influenced by structured materials
In: Form and Force : IASS Symposium 2019 - 60th Anniversary Symposium of the International Association for Shell and Spatial Structures/Structural Membranes 2019 - 9th International Conference on Textile Composites and Inflatable Structures : Barcelona, Spain, October 7-10, 2019 / Carlos Lázaro, Kai-Uwe Bletzinger and Eugenio Oñate (eds.) ; the conference organizers acknowledge the support of the following organizations: International Association for Shell and Spatial Structures (IASS), European Community on Computational Methods in Applied Sciences (ECCOMAS), International Association for Computational Mechanics (IACM), Asociación Española de Ingeniería Estructural, Universitat Politècnica de Catalunya (UPC), International Centre for Numerical Methods in Engineering (CIMNE) - Spain, E.T.S. Ingeniería de Caminos, C.y.P. (UPV), 1696-1703, 2019Saez, Dana Laura (Corresponding author)
Musto, Juan
Trautz, Martin -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Design and Analysis of Freeform Shell Structures Composed of Doubly Curved Sheet Metal Panels
In: Form and Force : IASS Symposium 2019 - 60th Anniversary Symposium of the International Association for Shell and Spatial Structures/Structural Membranes 2019 - 9th International Conference on Textile Composites and Inflatable Structures : Barcelona, Spain, October 7-10, 2019 / Carlos Lázaro, Kai-Uwe Bletzinger and Eugenio Oñate (eds.) ; the conference organizers acknowledge the support of the following organizations: International Association for Shell and Spatial Structures (IASS), European Community on Computational Methods in Applied Sciences (ECCOMAS), International Association for Computational Mechanics (IACM), Asociación Española de Ingeniería Estructural, Universitat Politècnica de Catalunya (UPC), International Centre for Numerical Methods in Engineering (CIMNE) - Spain, E.T.S. Ingeniería de Caminos, C.y.P. (UPV), 60-67, 2019Seiter, Alex Josef (Corresponding author)
Pofahl, Thorsten Christian
Trautz, Martin
Reitmaier, Lisa-Marie
Hirt, Gerhard -
[Doktorarbeit]
Folded plate structures : Geometry, mechanics, design, 2019
[DOI: 10.18154/RWTH-2020-00373]Della Puppa, Giovanni -
[Fachzeitschriftenartikel]
A Unified Representation of Folded Surfaces via Fourier Series
In: Nexus network journal : NNJ, 21 (3), 491-526, 2019
[DOI: 10.1007/s00004-019-00456-1]Della Puppa, Giovanni (Corresponding author)
Sauer, Roger Andrew
Trautz, Martin -
[Fachzeitschriftenartikel]
Beanspruchungsoptimierte Faltungen aus Stahl für selbsttragende Raumfaltwerke
In: Bautechnik : Zeitschrift für den gesamten Ingenieurbau, 96 (12), 902-911, 2019
[DOI: 10.1002/bate.201900024]Musto, Juan (Corresponding author)
Lyon, Max
Trautz, Martin
Kobbelt, Leif -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Prozesskette aus Streckziehen und Inkrementeller Blechumformung für die Fertigung mehrsinnig gekrümmter Feinblechpaneele
In: Ideen Form geben : 33. ASK Umformtechnik, 28.-29. März 2019, Eurogress Aachen :Tagungsband / [Gerhard Hirt] ; Institut für Bildsame Formgebung - Institut für Eisenhüttenkunde, Rheinisch-Westfälische Technische Hochschule Aachen, 147-156, 2019Reitmaier, Lisa-Marie (Corresponding author)
Bailly, David
Hirt, Gerhard
Pofahl, Thorsten Christian
Seiter, Alex Josef
Trautz, Martin -
[Poster]
Development of a Thick Plate Folding Mechanism as a Cover for a 3D printer
In: 7. International Meeting on Origami in Science, Mathematics and Education Oxford 2018-09-05 - 2018-09-07, 2018
[DOI: 10.13140/RG.2.2.23088.40966]Siebrecht, Justus (Corresponding author)
Jacobs, Georg
Dehn, Simon Michael
Spütz, Kathrin
Weigel, Chantal Denise (Corresponding author)
Hoffmann, Susanne
Buffart, Henri
Trautz, Martin
Paris, Jascha Norman
Corves, Burkhard -
[Preprint]
Karolingische Tonnengewölbe im Aachener Dom : Baugeschichte, Konstruktion und Technik, 2018
[DOI: 10.18154/RWTH-2019-01489]Raabe, Christian
Trautz, Martin
Di Pumpo, Carlaluisa -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Comparison and Derivable Benefits of Technical Folding
In: Digitalisierung und Produktentwicklung - vernetzte Entwicklungsumgebungen : 16. Gemeinsames Kolloquium Konstruktionstechnik : am 11. und 12. Oktober 2018 in Bayreuth : Tagungsband / Hrsg.: Klaus Brökel, Burkhard Corves, Karl-Heinrich Grote, Armin Lohrengel, Norbert Müller, Arun Nagarajah, Frank Rieg, Gerhard Scharr, Ralph Stelzer, 361-372, 2018Weigel, Chantal Denise
Jacobs, Georg
Katzwinkel, Tim
Merz, Judith
Paris, Jascha Norman
Corves, Burkhard
Buffart, Henri
Hoffmann, Susanne
Trautz, Martin -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Technische Faltung : ein praktischer Entwicklungsansatz
In: Digitalisierung und Produktentwicklung - vernetzte Entwicklungsumgebungen : 16. Gemeinsames Kolloquium Konstruktionstechnik : am 11. und 12. Oktober 2018 in Bayreuth : Tagungsband / Hrsg.: Klaus Brökel, Burkhard Corves, Karl-Heinrich Grote, Armin Lohrengel, Norbert Müller, Arun Nagarajah, Frank Rieg, Gerhard Scharr, Ralph Stelzer, 349-360, 2018Weigel, Chantal Denise
Jacobs, Georg
Katzwinkel, Tim
Siebrecht, Justus
Merz, Judith
Paris, Jascha Norman
Corves, Burkhard
Buffart, Henri
Hoffmann, Susanne
Trautz, Martin -
[Fachzeitschriftenartikel]
Robofakturen : Fabriktypen für die Industrie 4.0
In: wt Werkstattstechnik online, 108 (9), 586-591, 2018Trautz, Martin (Corresponding author)
Moser, Franziska Julia -
[Buchbeitrag, Beitrag zu einem Tagungsband]
On Using Tessellation Properties for the Development of Classifying Criteria for Foldable Mechanisms
In: Origami 7 : the proceedings from the 7th International Meeting on Origami Science, Mathematics, and Education / Editorial board Robert J. Lang [und 16 Weitere]. - Volume 4: Engineering Two, 1103-1118, 2018Siebrecht, Justus
Jacobs, Georg
Weigel, Chantal Denise
Dehn, Simon Michael
Buffart, Henri
Hoffmann, Susanne
Paris, Jascha Norman
Trautz, Martin
Corves, Burkhard -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Kinematic and Kinetostatic Classification for Motion-Task-Oriented Synthesis of Folding Mechanisms
In: Origami 7 : the proceedings from the 7th International Meeting on Origami Science, Mathematics, and Education / Editorial board Robert J. Lang [und 16 Weitere]. - Volume 4: Engineering Two, 1069-1086, 2018Paris, Jascha Norman
Merz, Judith
Buffart, Henri
Hoffmann, Susanne
Siebrecht, Justus
Weigel, Chantal Denise
Hüsing, Mathias
Trautz, Martin
Corves, Burkhard -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Educational Concepts for Developing and Designing Origami-Based Structures
In: Origami 7 : the proceedings from the 7th International Meeting on Origami Science, Mathematics, and Education / Editorial board Robert J. Lang [und 16 Weitere]. - Volume 1: Design, Education, History, and Science, 241-256, 2018Hoffmann, Susanne
Buffart, Henri
Paris, Jascha Norman
Merz, Judith
Siebrecht, Justus
Weigel, Chantal Denise
Corves, Burkhard
Trautz, Martin -
[Buchbeitrag, Beitrag zu einem Tagungsband]
Folding Mechanisms with Discriminate Extremal Configurations for Structural Purposes
In: Origami 7 : the proceedings from the 7th International Meeting on Origami Science, Mathematics, and Education / Editorial board Robert J. Lang [und 16 Weitere]. - Volume 3: Engineering One, 685-698, 2018Buffart, Henri
Hoffmann, Susanne
Paris, Jascha Norman
Weigel, Chantal Denise
Siebrecht, Justus
Corves, Burkhard
Trautz, Martin -
[Beitrag zu einem Tagungsband]
Bond behavior of axially loaded inclined self-tapping screws in glulam
In: [7. Doktorandenkolloquium "Holzbau Forschung und Praxis", 2018-03-08 - 2018-03-09, Stuttgart, Germany], 175-182, 2018Pranjic, Andrija (Corresponding author) -
[Beitrag zu einem Tagungsband]
Structural tree growth optimization
In: [World Conference on Timber Engineering 2018, WCTE, 2018-08-20 - 2018-08-24, Seoul, Korea], 2018Pranjic, Andrija (Corresponding author)
Trautz, Martin
Della Puppa, Giovanni -
[Beitrag zu einem Tagungsband]
Residual load-bearing capacity of self-tapping screws after long-term load
In: Proceedings of the IASS Symposium 2018 Creativity in Structural Design : July 16-20, 2018, Boston, USA / Caitlin Mueller, Sigrid Adraenssens (eds.), 160, 2018Koj, Christoph (Corresponding author)
Trautz, Martin
Grizmann, Denis
Pranjic, Andrija
Blättern
- Sie sind auf Seite:1-50
- 51-100
- 101-150
- letzte Seite
- nächste Seite